當前位置：北京中邦興業科技有限公司>>潔凈室，無塵車間用粒子計數器>>美國ATI TDA-6D氣溶膠發生器中國標準新式

美國ATI TDA-6D氣溶膠發生器中國標準新式

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號TDA-6D氣溶膠發生器

品牌

廠商性質經銷商

所在地北京市

在線詢價收藏產品查看聯系電話

聯系方式：王德龍查看聯系方式

更新時間：2017-07-08 17:24:59瀏覽次數：1697次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  潔凈室，無塵車間用粒子計數器

全部產品列表

  其他品牌

北京中邦興業科技有限公司

經營模式：經銷商

商鋪產品：96條

所在地區：北京北京市

聯系人：王德龍（銷售部經理）

詢價 給他留言

產品簡介

美國ATI TDA-6D氣溶膠發生器是TDA-6C的升級版本

詳細介紹

ATI 6D Aerosol Generator

Printable Specification Sheet

A tough, portable solution
The 6D is a small, light, and rugged portable, self-contained Laskin-Nozzle aerosol generator. It is ideal for testing a wide variety of filter systems with airflows up to 2,000 cfm by generating a poly-dispersed, sub-micron aerosol. Applications include workstations, negative-pressure filtration units, biological safety cabinets, ceiling modules, and more.

The 6D can also be used for testing positive pressure systems using an optional hose adapter. On-site routine maintenance is easy. And its integrated compressor makes implementation simple - all you need is a power source.

Performance Guaranteed
6D aerosol output is regulated with a standard issue calibrated pressure gauge; guaranteeing 20psi across the nozzle as specified in industry standards. The 6D complies with all applicable electrical and safety requirements and is supplied standard with the CE mark.

Easy to use
Integrated liquid fill sight glass, drain port, and power cord storage make operating, transporting, and storing the 6D simple and easy.

Optional Hose Adaptor Kit
A hose adaptor kit, used to introduce aerosol remoy, connects easily to the standard outlet using the sanitary flange or simple NPT connection.

Product specifications:

AEROSOL OUTPUT RANGE: 50 - 2,000 cfm

AEROSOL CONCENTRATION: 100 ug/l @ 200 cfm / 10 ug/l @ 2,000 cfm

GENERATOR TYPE: 2 or 6 Laskin Nozzle Jets （1/2 or 1-1/2 Nozzles）

AEROSOL TYPE: Poly-dispersed （Cold）

SIZE:14-1/2” L × 10” W × 9” H （37cm L × 26cm W × 23cm H）

WEIGHT: 34lbs （15kg）

ELECTRICAL: 110VAC/60 Hz or 220VAC/50Hz

COMPRESSED AIR:Not Required, On-Board, Integral Compressor

STANDARDS COMPLIANCE:
Filtration Industry: NSF 49, IEST, ISO-14644
Electrical. & Safety: CE, FCC, EN61010-1:2010, EN61326-1:2006

Aerosol output calculation
The 6D includes a total of 1-1/2 Laskin nozzles. Each "full" nozzle consists of four jets located at the nozzle tip, for a total of six jets. The aerosol concentration depends on the compressed air pressure and flow available for consumption by the nozzle. With 20 psig applied, each jet emits 18.75 slpm of air containing 1,275 ug/l of aerosol. When this aerosol is diluted with 135 cfm of air, the aerosol concentration becomes approximay 25 micrograms per liter. The equation below is for purposes of calculating the aerosol output in micrograms per liter （ug/l） when 20 psig is applied to the nozzle jets.

3,375 x （# of jets being used） divided by the total airflow （CFM）

NOTE: If more than 20 psig is used, the output concentration will increase and, conversely, if less than 20 psig is used, the output concentration will decrease.

Applications

· Clean Rooms

· Laminar Flow Benches

· Biosafety Cabinets

· Glove Boxes

· HEPA Vacuum Cleaners

· HVAC Systems

· HEPA Filters

· ULPA Filters

· Negative Pressure Filtration Units

· Surgical Suites

· Nuclear Filter Banks