JSY0101 LIQUEFIED petroleum gas Vapor pressure tester (LPG method)
I. Comply with GB/T6602, ISO4256, ASTMD1267 standard
Ii. Main Technical parameters:
Temperature control mode: Automatic temperature control with imported digital display temperature controller
Control temperature: 37.8±0.1℃
Pressure measuring range: 0 ~ 2Mpa
Pressure display: digital pressure display
On the projectile volume: room Φ 51 * 254 + 3 (mm)
Volume, 33.33 %
V up: V down 1 = 1.97 ~ 2.03
Volume, 20%
V up: V down 2 = 3.95 ~ 4.05
Oscillation mode: horizontal automatic positive and negative rotation
Oscillation speed: rotation of 320 degrees / 20±1 second
Power supply: AC220V± 10% 50HZ
Power: 2.5 kw
Iii. Performance and Characteristics
1. Adopting foreign advanced technology, the test projectile will automatically reciprocate and rotate horizontally, rotating 320° for 20 seconds and then rotate 320° in the opposite direction for 20 seconds. The oscillation intensity is no less than the artificial oscillation, which greatly reduces the labor intensity.
2. Adopt imported digital display temperature controller to automatically control temperature with high precision, easy operation and long service life.
3. Use pressure sensor to measure pressure, and use digital display table to directly display pressure value without conversion.
4. The test projectile and joint have been tested under high pressure and meet the standard requirements to ensure the safety and reliability of the instrument.
5. Water bath and test bomb are made of stainless steel, with good rust resistance. Adopt imported quick joint to connect instrument and test bomb, easy and convenient to operate.
6. The instrument is equipped with two upper Chambers, two 33. 33% lower Chambers and two 20% lower Chambers for parallel test of samples on the instrument.