污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
蘭州海蘭德泵業有限公司
會員1.png)
蘭州海蘭德泵業有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地
聯系方式：查看聯系方式
更新時間：2023-03-12 07:41:43瀏覽次數：205次
聯系我時，請告知來自 環保在線CAO臥式泥漿型磁力泵CAOHorizontalSlurryMagneticDrivenPumpCAO臥式泥漿型磁力泵CAOHorizontalSlurryMagneticDrivenPumpCAO型泵為單級單吸臥式磁力驅動離心泵
CAO臥式泥漿型磁力泵
CAO Horizontal Slurry Magnetic Driven Pump
CAO型泵為單級單吸臥式磁力驅動離心泵，針對含有一定固體顆粒介質而研發的一種新型泥漿型磁力泵，該型泵參照美國石油學會API685及其相關標準設計制造，具有全密封、無泄漏、無污染、抗磨損、耐腐蝕能力強、安全可靠、使用壽命長等特 點，可廣泛應用于石油化工、精細化工、冶金、電力等行業。CQAO型泵通過內外磁轉子耦合傳動，隔離套將內磁轉子密封在泵腔內，運用磁力驅動技術與流體動力密封結合，解決了含固體顆粒介質的輸送難題。本系列泵較適用于易結晶、易沉淀、有懸浮物的介質；濃度﹤10%的小的軟固體顆粒介質；紙漿、有短纖維狀無磨蝕性、易堵塞的介質和氣液混輸（氣體﹤10%）。本系列泵不適用于有磨蝕性的固體硬顆粒，如砂漿、灰渣、礦渣；容易產生纏繞的長纖維物。
CAO horizontal slurry magnetic driven pump is a new type slurry type magnetic driven pump (single stage, single suction horizontal magnetic drive centrifugal pump) developed for media containing certain amount of solid particles. It has been designed and manufactured by referencing API685 and other relevant standards. It features full sealing, no leakage, no pollution, wear resistance, strong resistance to corrosion, high safety, high reliability, and long service life etc. It can be widely used for petrochemical industry, fine chemical industry, metallurgy, and electric power industry etc.
CAO pump is driven by coupled internal and external magnetic rotors. An isolation sleeve seals the internal magnetic rotor inside the pump cavity. Magnetic drive technology has been combined with fluid dynamic seal, solving the difficult problem of conveying media containing solid particles.
This series pumps are better applicable to media subject to crystallization, precipitation, or suspended matter; soft solid particle media of concentration <10%; paper pulp; media containing short fibers (without abrasion) and subject to easy clogging; and mixed gas-liquid media (gas <10%).
This series pumps are not applicable to media containing abrasive hard solid particles, e.g. mortar, clinker, slag, and long fibers subject to easy winding.
結構說明 Description of structure
1.該系列泵均為單級、單吸、臥式、懸臂離心泵；
2. 泵為軸向水平吸入，徑向垂直排出，也可制成左側或右側排出；
3.泵體為蝸殼式、徑向剖分，具有底腳支撐和中心支撐兩種形式；
4.葉輪為開式或半開式葉輪，帶背葉片，以平衡軸向力；
5.葉輪前后相對應處設置了耐磨板，便于磨損后更換，也便于沖洗。
6.泵體、耐磨板材料可以選用特種材料或噴涂耐磨耐腐蝕材料等；
7.采用外沖洗結構，不讓顆粒進入密封腔，確保運行安全。
8.優化的剛性軸結構設計，具有更佳的撓度指數，使泵的振動值進一步降低。
9.內置滑動軸承采用了大厚度、重載、強推力陶瓷軸承，選用高純度、高耐磨性的碳
化硅材料，使用壽命長。
10.內外磁轉子均為全密封式結構，防止泵在腐蝕環境下磁體腐蝕和磁性能的衰退。
11.滾動軸承采用稀油潤滑，其油位由油標和油杯同時控制，油杯能自動補償油位；
12.采用了加長撓性膜片式聯軸器部件，檢修時不必拆卸吸入和吐出管路就能拆出葉
13.泵和電機安裝在同一個公用底座上。
14.法蘭標準可提供ANSI、HG/T20615、HG/T20592等多種選擇。
15.可配帶普通Y系列電機、YB系列防爆型電機、直流電機和永磁電機等。
16.泵的效率高，汽蝕性能好、零部件的通用性、互換性好，運轉穩定。
1. This series pumps are all single stage, single suction, horizontal, unshrouded impeller cantilever centrifugal pumps.
2. These pumps adopt axial horizontal suction and radial vertical discharge (or left or right discharge).
3. Pump body adopts volute type, radial splitting, and bottom feet support or central support .
4. Unshrouded impeller or semishrouded impeller is adopted, with rear blade provided to balance axial force.
5. Wear plates are provided at corresponding positions before and after the impeller to allow replacement after wear and flushing.
6. Material of pump body and wear plates may be special material or wear and resistant coated material subject.
7. External flushing structure is adopted to prevent particles from entering the sealed cavity,
ensuring operational safety.
8. Optimized rigid shaft structural design provides better deflection index, further reducing pump vibration.
9. Internal sliding bearing adopts thick, heavy duty, strong thrust ceramic bearing, and high purity, high wear resistance silicon carbide material, thus allowing long service life.
10. Both internal and external magnetic rotors adopt fully sealed structure, thus preventing pump magnet corrosion in corrosive environment and deterioration of magnetism.
11. Roller bearing is lubricated by oil, with the oil level controlled by both oil gauge and oil cup. This oil cup can automatically compensate the oil level.
12. Lengthened flexible membrane type coupling is adopted. For maintenance, parts such as impeller and shaft etc. can be removed without dismantling the suction pipeline or discharge pipeline.
13. The pump and the motor are installed on the same pedestal.
14. Flange standard may be ANSI, HG/T20615, or HG/T20592.
15. ordinary Y series motor, YB series explosionproof motor, DC motor, or permanent magnet motor etc. can be used.
16. These pumps feature high efficiency, good cavitation performance, good versatility and interchangeability of parts, and stable operation.
性能范圍 The main specifications
流量Flow: Q=5.5～1100m3/h
揚程Lift: H=4.5～135m
工作溫度Operating temperature (t): -45℃～+250℃
標準轉速Standard rotation speed (n): 2900r/min/ 1475r/min
法蘭壓力等級Flange pressure rating: 2.5MPa
型號意義 Type denotation
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
