污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
寧波瑞柯偉業儀器有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地寧波市
聯系方式:何女士查看聯系方式
更新時間:2025-03-17 09:22:13瀏覽次數:18次
聯系我時,請告知來自 環保在線FT-106C普通磨料堆積密度測定儀
FT-106C普通磨料堆積密度測定儀
FT-106CCommon abrasive bulk density tester
一. 參照標準standard:
GB-T3603-83普通磨料堆積密度測定方法要求制作,適用于剛玉及碳化硅8~240號粒度磨料堆積密度的測定
According to GB-T3603-83, The bulk density measuring method of ordinary abrasive materials. It is suitable for the bulk density measurement of the grinding materials of Corundum and silicon carbidee which granularity between 8 and 240
二.參數資料Parameters
漏斗材質:黃銅或不銹鋼;錐部高度:82毫米;錐部角度:60~63°;
Funnel material: brass or stainless steel, cone height: 82 mm,
cone angle: 60~63°.
漏斗頸內徑:12.7±0.05毫米;漏斗頸長度:12.70.05毫米。
Funnel neck inner diameter:12.7±0.05 mm, funnel neck length: 12.70.05mm.
漏斗鎖閉裝置是一個直徑為35毫米的橡膠球。用兩根彈簧固定在漏斗頸的下端。漏斗頸下端至測量筒口的距離為115±2毫米。
The funnel locking device is a rubber ball with a diameter of 35 mm
5.測量筒材質:黃銅;內徑:39±0.1毫米; 內深度:83.7±0.1毫米;容積:約100厘米3. Measuring cylinder material: brass, inner diameter: 39±0.1mm, internal depth: 83.7±0.1mm,volume:100 cm3.
6.刮料板材質:黃銅Scraper material: brass
7.選購天平:稱重500g,0.1克
8.配置:架臺:1套 ;漏 斗: 1只;量杯; 黃銅材質(Φ31mm、25ml)1只;;溢料盤不銹鋼1只;毛 刷1只; 說明書;保修卡;合格證。
Equipment: Stand: 1 sets, funnel: 1pcs, measuring cup: brass (Φ31mm,25ml)1pcs,
overflow tray stainless steel 1pcs, brush 1pcs,manual,warranty card, certificate.您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
寧波瑞柯偉業儀器有限公司