環保在線>產品庫>泵-主分類>油泵>潤滑油泵>>圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵

圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱通大水泵有限公司
品牌
型號
所在地長沙市
廠商性質經銷商
更新時間2024/12/2 11:10:29
訪問次數129

產品標簽:

在線詢價收藏產品點擊查看電話

索取相關資料

公司介紹主營產品

通大水泵有限公司是生產水泵和供水設備的專業供應商，始建于一九八六年，為獨資私營企業，在改革開放以來我廠在不斷地吸收人才提高企業素質的同時，堅持以科技求發展，以質量求效益為方針，勇于開拓不斷創新，近幾年來企業不斷地上規模上水平上檔次。本廠擁有*的內部管理水平和優秀的設計技術隊伍及整套完善*的檢測設備，使本廠產品質量精益求精，不斷地推陳出新。其中恒壓變頻調速全自動供水設備是上八十年代發展起來的新一代產品，它采用了交流變頻調速（PWM）技術及單片機技術是集機械電氣微機控制于一體的高科技產品，用于它可以直接取代高位水塔、高位水箱及傳統的氣壓缸供水裝置，從而為局部加壓供水開辟了新的途徑將現代高科技引入了供水領域。并取得到了湖南省消防產品認證，成為湖南省消防水泵定點生產企業。

展開顯示更多內容

智能恒壓變頻供水設備、自動控制柜、消防泵、變頻空調泵、環保水泵、環?？照{(diào)泵、變頻泵、離心泵、清水泵、多級泵、化工泵、油泵、潛水排污泵、砂泵、中開泵、泥漿泵、深井泵、深井潛水泵、真空泵、施渦泵、管道泵、熱水泵、不銹鋼潛水泵、自吸泵

產品簡介在線詢價

產品分類：油泵產品名稱：圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵流量范圍：Q=0.6～50m3/h 揚程范圍：壓力0.6Mpa 輸送溫度：-2......

圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵產品信息

產品概述：

YCB系列圓弧齒輪泵YCB SERIES CIRCULAR ARC GEAR PUMP

用途

■在輸油系統中可作傳輸、增壓泵。

■在燃油系統中可作輸送、加壓、噴射的燃油泵。在一切工業領域中,均可作潤滑油泵用。

■Application:

This pump can be used as a transfer and booster pump in oil delivery systems. It can also be used as a fuel pump for delivery, pressurization, and injection in fuel systems. It can be used as a lubricating oil pump in all industrial fields.

適用范圍

■適用于輸送不含固體顆粒和纖維、無腐蝕性,溫度不高于80℃.粘度為5~1500cSt的潤滑油或性質類似潤滑油的其它液體,本系列另有精鑄不銹鋼材質,適用于腐蝕性介質。

結構特點

■該齒輪采用具有水平的新技術一雙圓弧正弦曲線齒型。它與漸開線齒輪相比,的優點是齒輪嚙合過程中齒廓面沒有相對滑動,所以齒面無磨損、運轉平衡、無困液現象,噪聲低.壽命長、效率高。該泵擺脫了傳統設計的束縛,使得齒輪泵在設計、生產和使用上進入了一個新的領域。

■泵設有差壓式安全閥作為超載保護,安全閥全回流壓力為泵額定排出壓力的1.5倍,也可在允許排出壓力范圍內根據實際需要另行調整。但是此安全閥不能作減壓閥長期工作,需要時可在管路上另行安裝。

■該泵軸端密封設計為兩種形式;一種是機械密封,一種是填料密封,用戶可根據使用要求選擇。

■Application:

This gear pump is suitable for conveying lubricating oil or other liquids with similar properties, with a viscosity of 5~1500cSt, which do not contain solid particles, fibers, or have no corrosiveness. The series also has precision cast stainless steel material, which is suitable for corrosive media. The temperature should not exceed 80℃.

■Structural Characteristics:

This gear adopts a new technology with an international advanced level of a double circular arc sine curve tooth profile. Compared with the involute gear, the most prominent advantage is that there is no relative sliding between the tooth profile surfaces during gear meshing, so the tooth surface has no wear, runs smoothly, and has no trapped liquid phenomenon, low noise, long life, and high efficiency. The pump breaks away from the constraints of traditional design, making gear pumps enter a new field in design, production, and use.

■The pump is equipped with a differential pressure safety valve as overload protection. The full reflux pressure of the safety valve is 1.5 times the rated discharge pressure of the pump and can be adjusted separately within the allowed discharge pressure range according to actual needs. However, this safety valve cannot work as a pressure reducing valve for a long time and can be installed separately on the pipeline when needed.

■The shaft end seal of the pump is designed in two forms: mechanical seal and packing seal. Users can choose according to their requirements.