常州熱油泵 ペら精度高 質量保證泵的使用和維護：首先，常州熱油泵與管道安裝好后，不管是采用水壓還是氣壓，泵的進出口閥門一定要先關閉，才能進行試壓，否則有可能損壞密封件，造成漏油。開機準備：清理現場，擰開軸承座螺絲，在常州熱油泵中加入干凈導熱油作為潤滑油。110KW以上的大油泵加潤滑油時從一孔注入直到另一孔有油溢出來。在加注潤滑油的過程中用手撫過聯軸器，直到孔內不再有氣體冒出再擰緊螺孔螺栓。
The use of pump and maintenance: first, after the Changzhou hot oil pump and pipeline installation, no matter is the use of hydraulic or pneumatic, pump inlet and outlet valves must first shut down, in order to carry out the pressure test, otherwise there may be damage to seals, caused by oil spills.Preparation: clean up the site, unscrew the screw bearing seat in Changzhou, adding hot oil pumpclean oil as lubricating oil. Lubricating oil pump high above 110KW from a hole into the hole until another oil spill. Hand stroking coupling in lubricating oil filling process, there is no gas emitting,tighten the screw bolt until the hole.
常州市武研熱油泵有限公司
地 址：常州市武進區橫林鎮橫玉路247號
銷 售：,
售 后：
傳 真：
手 機：
: 876363125
郵 箱：WRY@vip.163.com
常州熱油泵：www.wry006。。ｃｏｍ
WRY熱油泵：www.wry002。。ｃｏｍ
熱油泵配件：www.wry008。。ｃｏｍ
離心式熱油泵：www.wry003。。ｃｏｍ
友情鏈接：耐腐蝕化工泵 www.wyryb。。ｃｏｍ
鍋爐輔機：www.whboiler。。ｃｏｍ
刮板出渣機：www.cz-boiler。。ｎｅｔ
主動/被動爐排片：www.glfj。。ｎｅｔ
提升式上煤機：www.wh-boiler。。ｃｏｍ
武研導熱油泵：http://wrypump.cn.alibaba.com
鍋爐輔機配件：http://glboiler.cn.alibaba.com
2015.5.16張
