亚洲国产精品二区久久,日本美女后入式午夜视频在线观看,国产污视频在线观看,欧美日韩国产精品中文字幕在线观看

標準編號 標準中文名稱 標準英文名稱
GB/T13852-1992  船用液壓控制閥技術條件 General specification of hydraulic control valves for ship
GB/T17490-1998  液壓控制閥油口、底板、控制裝置和電磁鐵的標識 Hydraulic fluid power--Identification of valve ports,subplates,control devicessolenoids
GB/T15623.1-2003  液壓傳動 電調制液壓控制閥 第1部分：四通方向流量控制閥試驗方法 Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves
GB/T15623.2-2003  液壓傳動 電調制液壓控制閥 第2部分：三通方向流量控制閥試驗方法 Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves
GB/T17213.7-1998  工業過程控制閥第7部分: 控制閥數據單 Industrial-process control valves Part 7: Control valve data sheet
GB/T17213.8-1998  工業過程控制閥第8部分: 噪聲的考慮第1節: 實驗室內測量空氣動力流流徑控制閥產生的噪聲 Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
GB/T17213.1-1998  工業過程控制閥第1部分: 控制閥術語和總則 Industrial--Process control valves Part 1: Control valve terminologygeneral considerations
GB/T17213.5-1998  工業過程控制閥第5部分: 標志 Industrial-process control valves Part 5: Marking
GB/T2514-1993  四油口板式液壓方向控制閥安裝面 Hydraulic fluid power--Four-port directional control valves--Mounting surfaces
GB/T8104-1987  流量控制閥試驗方法 Hydraulic fluid power--Valves--Testing method of flow control valves
GB/T7940.3-2001  氣動五氣口方向控制閥第三部分: 功能識別編碼體系 Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions
GB/T8106-1987  方向控制閥試驗方法 Hydraulic fluid power--Valves--Testing method of directional control valves
GB/T7940.2-2001  氣動五氣口方向控制閥第二部分帶電氣接頭的安裝面 Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connector
GB/T8105-1987  壓力控制閥試驗方法 Hydraulic fluid power--Valves--Testing method of pressure control valves
GB/T7940.1-2001  氣動五氣口方向控制閥*部分: 不帶電氣接頭的安裝面 Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector
GB/T8100-1987  板式聯接液壓壓力控制閥不包括溢流閥順序閥、卸荷閥、節流閥和單向閥安裝面 Hydraulic fluid power--Pressure control valves excluding pressure relief valves , sequence valves, unloading valves, throttle valvescheck valves--Mounting surfaces
GB/T8098-2003  液壓傳動帶補償?shù)牧髁靠刂崎y安裝面 Hydraulic fluid power--Compensated flow control valves--Mounting surfaces
JB/T復審  工業過程控制系統用電動控制閥 　
NF C46-520-1993  工業過程控制閥.第8部分:噪聲問題.第2節:通過控制閥的液壓流動產生的噪聲的實驗室測量 Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.
NF C46-522-1994  工業處理控制閥.第8部分:噪聲條款.第4節:液壓流動產生的噪聲預定EN 534-8-4 Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.
NF E49-080-1-2002  氣壓液動.五通定向控制閥.第1部分:不帶電連接器的安裝接口 Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.
NF E49-080-2-2002  氣壓液動.五通方向控制閥.第2部分:任選電氣連接器的安裝接口面 Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.
NF C46-505-1998  絕緣過程控制閥.第2-3部分:流量容量.試驗過程 Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.
NF C46-630-1998  工業過程控制閥.第6部分:控制閥與定位器連接用安裝細節.第1節:線性傳動裝置上安裝的定位器 Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.
NF E29-453-2000  工業過程控制閥門 Industrial process control valves.
NF E29-316-5-2001  供水用閥門.適用性要求和檢查試驗.第5部分:控制閥門 Valves for water supply - Fitness for purpose requirementsappropriate verification tests - Part 5 : control valves.
NF C46-521-2001  工業過程控制閥.第8部分:噪聲問題.第3節:氣動控制閥噪聲預測法 Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.
NF E48-435-1998  液壓傳動.尺寸02、03和05的四端口模式排氣閥和四端口方向控制閥.夾緊尺寸 Hydraulic fluid power. Four-port modular stack valvesfour-port directional control valves, sizes 02, 0305. Clamping dimensions.
NF C46-519-2001  工業過程控制閥.第8部分:噪聲考慮.第1節:實驗室測量氣動流經控制閥產生的噪聲 Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.
NF C46-531-2001  工業過程控制閥.第6-2部分:定位器裝到控制閥的安裝細則.旋轉傳動裝置上安裝的定位器 Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.
NF E49-091-2002  氣壓傳動.控制閥和其它部件的孔口和控制機械的驗證 Pneumatic fluid power - Identification of portscontrol mechanisms of control valvesother components.
XP E29-140-1999  使用氣體燃料的家用裝置的控制閥.安全控制閥帶有集中自動密閉器的 Control cocks for household appliances using gaseous fuels - Safety cocks with integrated automatic obturator.
NF C46-510-2001  工業過程控制閥.第3-1部分:尺寸.雙通球型直立式控制法蘭閥門的面對面尺寸和雙通球型角度控制法蘭閥門的中心 Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight patterncentre-to-face dimensions for flanged, two-way, globe-type, a
NF C46-511-2001  工業過程控制閥.第3-2部分:尺寸.蝶閥除外的旋轉控制閥門的面對面尺寸 Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.
NF E49-090-2-2003  氣壓傳動.18mm和26mm五氣口方向控制閥.第2部分:帶光學電接頭的安裝面 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm26 mm - Part 2 : mounting interfaces with optional electrical connector.
NF C46-512-1999  工業處理控制閥.第3-3部分:尺寸.對焊接的頭尾相接尺寸.兩接頭球型直接式控制閥歐洲標準EN 60534-3-3 Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.
ANSI/IEEE 1290-1996  核發電站電動控制閥門馬達應用、防護、控制和試驗指南 Guide for MOV Motor-Operated Valve Motor Application, Protection, Control,Testing in Nuclear Power Generating Stations
ANSI/FCI 87-2-1990  彈簧模板驅動控制閥動力信號標準 Power Signal Standard for Spring-Diaphragm Actuated Control Valves
ANSI/ISA 75.08.02-2003  無凸緣的控制閥端面間的尺寸級別150、300和600  Face-to-Face Dimensions for Flangeless Control Valves Classes 150, 300,600
ANSI/ISA S 75.08.03-2001  承插焊接端頭和螺旋端頭球狀控制閥的面到面尺寸 Face-to-Face Dimensions for Socket Weld-EndScrewed-End Globe-Style Control Valves ANSI Classes 150, 300, 600, 900, 1500,2500
ANSI/ISA 75.08.06-2002  帶凸緣的球型控制閥體的面對面尺寸類型900、1500和2500  Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies Classes 900, 1500,2500
ANSI/ISA 75.08.05-2002  端頭對焊球型控制閥的面對面尺寸類型150、300、600、900、1500和2500  Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves Classes 150, 300, 600, 900, 1500,2500
ANSI/ISA 75.01.01-2002  尺寸控制閥用流量方程式  Flow Equations for Sizing Control Valves
ANSI/ISA 75.08.01-2002  整體式帶凸緣的球型控制閥體的面對面尺寸類型125、150、250、300和600  Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies Classes 125, 150, 250, 300,600
ANSI/ISA S 75.19.01-2001  控制閥的靜水試驗 Hydrostatic Testing of Control Valves
ANSI/ISA S 75.08.04-2001  對焊端頭球狀控制閥的面到面尺寸 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ANSI/ISA S 75.08.07-2001  獨立法蘭球狀控制閥的面到面尺寸 Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves Classes 150, 300,600
ANSI/NFPA T 3.5.14 R1-1997  液力傳動.直接控制閥門.分界特性的測定方法 Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics
ANSI/NFPA T 3.21.8-1990  氣壓液動.反應時間的測量.直接控制閥門 Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves
ANSI/ISA S 75.15-1993  對焊端球狀控制閥的面對面尺寸ANSI等級150、300、600、900、1500、2500 Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves ANSI Classes 150, 300, 600, 900, 1500,2500
ANSI/FCI 91-1-1997  控制閥門密封的質量標準 Standard for Qualification of Control Valve Stem Seals
ANSI/UL 753-1996  消防裝置用自動供水控制閥的警報附件 Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service
BS EN 60534-2-5-2003  工業過程控制閥.流通能力.通過有段間恢復功能的多段控制閥的流體流量的校準公式 Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
ASTM F 1985-1999  氣力操作的球形控制閥標準規范 Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves
BS EN 60534-3-2-2001  工業過程控制閥.尺寸.蝶形閥除外的轉式控制閥的端面距 Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
BS ISO 15407-2-2003  氣壓傳動.五氣口方向控制閥,規格18mm和26mm.有任選電接頭的安裝接口 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm26 mm - Mounting interface surfaces with optional electrical connector
BS ISO 12238-2001  氣壓液動.方向控制閥門.轉換時間的測量 Pneumatic fluid power - Directional control valves - Measurement of shifting time
BS ISO 5599-1-2001  氣壓液動.五通方向控制閥.不帶電連接器的安裝接口表面 Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector
BS ISO 5599-2-2001  氣壓液動.五通方向控制閥.任選電氣連接器的安裝接口面 Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector
BS EN 60534-6-2-2001  工業過程控制閥.定位器裝到控制閥的安裝細則.旋轉傳動裝置上安裝的定位器 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators
BS EN 1074-5-2001  供水閥門.適用性和要求的試驗.控制閥門 Valves for water supply - Fitness for purpose requirementsappropriate verification tests - Control valves
BS EN 60534-8-3-2000  工業流程控制閥.噪聲問題.控制閥的空氣動力噪聲預報法 Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method
BS EN 60534-2-3-1998  工業過程控制閥.流量.試驗程序 Industrial-process control valves - Flow capacity - Test procedures
BS EN 60534-8-1-2001  工業過程控制閥.噪聲問題.通過控制閥的動力噪聲的實驗室測量 Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
BS EN 60534-3-1-2000  工業過程控制閥.尺寸.帶法蘭的兩路、球型、直立式控制閥門的面對面尺寸和帶法蘭的兩路、球型、角度控制閥門 Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight patterncentre-to-face dimensions for flanged, two-way, globe-type, angle patter
BS EN 1349-2000  工業處理控制閥門 Industrial process control valves
BS ISO 15407-1-2000  18mm和26mm五氣口氣動方向控制閥.無電插頭的安裝界面 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm26 mm - Mounting interface surfaces without electrical connector
BS ISO 11727-1999  氣動流體力學.控制閥和其它元件的控制機械裝置和氣門的識別 Pneumatic fluid power - Identification of portscontrol mechanisms of control valvesother components
BS EN 60534-3-3-1998  工業過程控制閥.尺寸.對接焊接,兩向,球型,垂直模式控制閥的末端對末端尺寸 Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
BS EN 60534-2-1-1999  工業過程控制閥 .流容.安裝條件下液流規模方程 Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions
BS ISO 6263-1997  液壓傳動.補償式流量控制閥.裝配面 Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
BS ISO 10770-2-1998  液壓傳動.電模式液壓控制閥.第2部分:三向流動控制閥的試驗方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves
BS ISO 10770-1-1998  液壓傳動.電模式液壓控制閥.第1部分:四向流動控制閥的試驗方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves
BS EN 60534-6-1-1998  工業過程控制閥 .控制閥調節器連接用安裝元件.直線傳動裝置上調節器的安裝 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators
BS ISO 7790-1998  液壓傳動.規格為03和05型的四油口標準設計疊閥和四油口定向控制閥.緊固尺寸 Hydraulic fluid power - Four-port modular stack valvesfour-port directional control valves, sizes 02, 0305 - Clamping dimensions
EN 60534-8-1-2000  工業過程控制閥　第8部分：噪聲的考慮　第1節：氣動流流徑控制閥產生的噪聲的實驗室測量 Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves IEC 60534-8-1:1986
EN 60534-8-4-1994  工業過程控制閥　第8部分：噪聲問題　第4節：流動產生的噪聲的預測 Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow IEC 60534-8-4:1994
EN 60534-8-3-2000  工業流程控制閥　.第8-3部分　噪聲問題　通過控制閥的動力噪聲預測法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method IEC 60534-8-3:2000
EN 1074-5-2001  供水閥門 目的要求的適應性和合適的認證試驗 第5部分：控制閥門 Valves for water supply - Fitness for purpose requirementsappropriate verification tests - Part 5: Control valves
EN 60534-3-1-2000  工業過程控制閥　第３－１部分：尺寸　法蘭雙通球形直型控制閥的端面間距尺寸和有法蘭雙通球型角型控制閥的 Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight patterncentre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves IEC 60534-3-1:2000
EN 60534-2-1-1998  工業過程控制閥　第2－1部分：流通能力　安裝條件下流體流量的校準公式 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions IEC 60534-2-1:1998
EN 60534-1-1993  工業過程控制閥　第1部分　控制閥術語和一般考慮 Industrial-process control valves - Part 1: Control valve terminologygeneral considerations IEC 60534-1:1987
EN 60534-3-2-2001  工業過程控制閥　第３部分：尺寸　第２節：無法蘭控制閥（薄型蝶閥除外）的端面間距尺寸 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves IEC 60534-3-2:2001
EN 60534-3-3-1998  工業過程控制閥　第三部分：尺寸　對接焊接　兩向　球型　垂直模式控制閥的末端對末端尺寸 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves IEC 60534-3-3:1998
EN 60534-6-1-1997  工業過程控制閥　第6－1部分：定位器聯到控制閥執行機構的安裝細則　第1節：直線傳動裝置上調節器的安裝 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators IEC 60534-6-1:1997
EN 60534-6-2-2001  工業過程控制閥　第6－2部分：定位器聯到控制閥執行機構的安裝細則　環形執行機構定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators IEC 60534-6-2:2000
EN 60534-8-2-1993  工業過程控制閥　第8部分　噪聲考慮　第2節通過控制閥的流體產生的噪聲的實驗室測量報法 Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves IEC 60534-8-2:1991
EN 60534-2-3-1998  工業過程控制閥　第２部分：流通能力　第３節：試驗規程 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures IEC 60534-2-3:1997
prEN 13959-2000  公稱壓力在DN6至DN250（含DN250）的防污染控制閥　E族A、B、C和D型 Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, CD
prEN 60534-4-1998  工業過程控制閥　第４部分：檢驗和常規試驗　草案 IEC 60534-4: Industrial-process control valves - Part 4: Inspectionroutine testing
EN 1349-2000+AC-2001  工業加工控制閥門 Industrial process control valves
EN 60534-2-5-2003  工業加工控制閥　第2-5部分：流量　 通過帶級間恢復多級控制閥的流體尺寸方程　 Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery IEC 60534-2-5:2003 / Note: Endorsement notice
BS ISO 4401-1996  液壓傳動.四油口定向控制閥.裝配面 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
BS EN 60534-1-1989  工業過程控制閥 .第1部分:控制閥術語和一般考慮 Industrial-process control valves - Industrial-process control valves - Control valve terminologygeneral considerations
BS EN 60534-8-4-1994  工業過程控制閥.第8部分:噪聲問題.第4節.流動產生的噪聲的預報 Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow
BS EN 60534-8-2-1991  工業過程控制閥.第8部分:噪聲考慮.第2節:通過控制閥的流體產生的噪聲的實驗室測量 Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
BS 6494-4-1989  液壓閥的安裝面.第4部分:03和05規格的四孔組件排氣閥、模數組閥和方向控制閥夾緊尺寸規范 Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 0305, modular stack valvesdirectional control valves
BS 5793-4-1987  工業過程控制閥.第4部分:檢驗和例行試驗規范 Industrial-process control valves - Specification for inspectionroutine testing
BS 5944-4-1984  液壓動力系統和部件所產生的空氣噪音的測量.第4部分:流量和壓力控制閥聲功率級的測定方法 Measurement of airborne noise from hydraulic fluid power systemscomponents - Method of determining sound power levels from valves controlling flowpressure
BS 5793-5-1984  工業過程控制閥.第5部分:標記規范 Industrial-process control valves - Specification for marking
標準編號 標準中文名稱 標準英文名稱
BS 1655-1950  過程控制工業用法蘭連接自動控制閥面至面尺寸規范 Specification for flanged automatic control valves for the process control industry face-to-face dimensions
DIN EN 60534-2-3-1998  工業過程控制閥.第2-3部分:流量.檢驗方法 Industrial-process control valves - Part 2-3: Flow capacity; test procedures IEC 60534-2-3:1997; German version EN 60534-2-3:1998
DIN EN 60534-6-1-1998  工業流程控制閥.第6部分:調節閥門驅動的位置調節器固定用安裝細節.第1節:行程驅動上位置調節器的安裝 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators IEC 60534-6-1:1997; German version EN 60534-6-1:1997
DIN EN 60534-1-1995  工業過程控制閥.第1部分:控制閥術語和一般原理 Industrial-process control valves - Part 1: Control valve terminologygeneral considerations IEC 60534-1:1987; German version EN 60534-1:1993
DIN IEC 60534-7-1992  工業過程控制閥.第7部分:.數據表 Industrial process control valves; control valve data sheet; identical with IEC 60534-7:1989
DIN IEC 60534-2-4-1990  工業過程控制閥.第2部分:流通能力.第4節:內在的流動特性線和調節比例關系 Industrial-process control valves; flow capacity; inherent flow characteristicsrangeability; identical with IEC 60534-2-4:1989
DIN EN 60534-8-2-1994  工業過程控制閥.第8部分:噪聲問題.第2節:由通過控制閥的液力流產生的噪聲的實驗室測量 Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves IEC 60534-8-2:1991; German version EN 60534-8-2:1993
DIN EN 60534-8-4-1995  工業過程控制閥.第8部分:噪聲狀態.第4節.流動產生的噪聲的預報 Industrial-process control valves - Part 8: Noise considerations; section 4: Prediction of noise generated by hydrodynamic flow IEC 60534-8-4:1994; German version EN 60534-8-4:1994
DIN EN 60534-3-1-2000  工業過程控制閥.第3-1部分:尺寸.雙通球型直立式控制法蘭閥門的面對面尺寸和雙通球型角度控制法蘭閥門的中心 Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight patterncentre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves IEC 60534-3-1:2000; German version EN 60534-3-1:2000 + Corrigendum 2000
DIN 3394-3-2004  自動控制閥.第3部分:壓力為4巴及以下的0級減壓安全閥 Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar
DIN EN 60534-3-3-2000  工業過程控制閥.第3-3部分:尺寸.對頭焊接的對頭尺寸,兩種方式,球型,直角型控制閥門 Industrial-process control valves - Part 3-3: Dimensions - end-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves IEC 60534-3-3:1998; German version EN 60534-3-3:1998
DIN EN 60534-2-1-2000  工業過程控制閥.第2-1部分:流動容量.在安裝條件下流體流動的尺寸方程 Industrial-process control valves - Part 2-1: Flow capacity; sizing equations for fluid flow under installed conditions IEC 60534-2-1:1998; German version EN 60534-2-1:1998
DIN EN 1074-5-2001  供水閥門.適用性要求和適配試驗.第5部分:控制閥門 Valves for water supply - Fitness for purpose requirementsappropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001
DIN EN 12334-2001  工業閥門.鑄鐵控制閥門 Industrial valves - Cast iron check valves; German version EN 12334:2001
DIN EN 60534-8-3-2001  工業過程控制閥.第8-3部分:噪聲問題.控制閥空氣動力噪聲預測法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method IEC 60534-8-3:2000; German version EN 60534-8-3:2000
DIN IEC 60534-5-1984  工業過程控制閥.第5部分:標記 Industrial-process control valves; part 5: marking
DIN EN 60534-6-2-2001  工業過程控制閥.第6-2部分:定位器裝到控制閥上的安裝細則.旋轉傳動裝置上安裝的定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators IEC 60534-6-2:2000; German version EN 60534-6-2:2001
DIN EN 1349-2000  工業過程控制閥門 Industrial process control valves; German version EN 1349:2000
DIN EN 60534-8-1-2001  工業過程控制閥.第8部分:噪聲問題.第1節:由通過控制閥的空氣動力流產生的噪聲的實驗室測量 Industrial-process control valves - Part 8: Noise considerations; Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves IEC 60534-8-1:1986; German version EN 60534-8-1:2000
DIN ISO 15407-1-2003  氣壓傳動.五氣口方向控制閥、規格18mm和26mm.第1部分:無電氣接頭的安裝面 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm26 mm - Part 1: Mounting interface surfaces without electrical connector ISO 15407-1:2000
DIN ISO 5599-1-1998  氣壓液動.五通方向控制閥.第1部分:不帶電連接件的安裝接口表面 Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connectors ISO 5599-1:1989
DIN EN 60534-3-2-2002  工業過程控制閥.第3-2部分:尺寸.無法蘭控制閥薄型蝶閥除外的端面間距尺寸IEC60534-3-2:2001 Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves IEC 60534-3-2:2001; German version EN 60534-3-2:2001
IEC 60534-3-2-2001  工業過程控制閥.第3-2部分:尺寸.蝶形閥除外的轉式控制閥的端面距 Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves
IEC 60534-2-5-2003  工業過程控制閥.第2-5部分:流通能力.通過有段間恢復能力的多段控制閥門的流體流量的校準公式 Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery
IEC 60534-5-1982  工業過程控制閥.第5部分:標志 Industrial-process control valves. Part 5 : Marking
IEC 60534-2-1-1998  工業過程控制閥.第2-1部分:流量.安裝條件下流體流量的校準公式 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
IEC 60534-8-4-1994  工業過程控制閥.第8部分:噪聲狀態.第4節.流動產生的噪聲的預報 Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow
JIS B8656-2002  比例電動液壓旁通流量控制閥試驗方法 Test methods for electro-hydraulic proportional bypass flow control valves
JIS B8654-2002  比例電動液壓串聯型流量控制閥試驗方法 Test methods for electro-hydraulic proportional series flow control valves
JIS B8657-2002  比例電動液壓定向旁通流量控制閥試驗方法 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B8659-2-2002  液壓傳動.電氣調節液壓控制閥門.第2部分:三路定向流量控制閥門的試驗方法 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves
UL 429-1999  電動控制閥  Electrically operated valves
UL 753-1995  消防裝置用自動供水控制閥報警附件  Alarm accessories for automatic water-supply control valves for fire protection service
UL 1468-1995  防火設備用直接控制的減壓閥和壓力控制閥  Direct acting pressure reducingpressure restricting valves
UL 1739-1994  消防設備用液壓控制的壓力控制閥  Pilot-operated pressure-control valves for fire-protection service
JIS B8655-2002  比例電動液壓串聯型定向流量控制閥試驗方法 Test methods for electro-hydraulic proportional directional series flow control valves
JIS B8375-3-2000  氣動液壓.五孔定向控制閥.第3部分:閥功能通訊的密碼系統 Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions
JIS B8375-1-2000  氣動液壓.五孔定向控制閥.第1部分:無電接頭的安裝界面 Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector
JIS B8357-2000  液壓傳動., , , 補償式流量控制閥.裝配面 Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces
JIS B8400-1-2003  氣壓傳動.尺寸為18mm-26mm的五孔定向控制閥.第1部分:無電連接件的安裝接口表面 Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm26 mm -- Part 1: Mounting interface surfaces without electrical connector
JIS F3024-1996  造船.控制閥用艙面支座 Shipbuilding -- Deck stands for controlling valves
JIS B8658-1989  比例電動液壓控制閥用電力放大器規則 Rules of electronic amplifier for electro-hydraulic control valves
JIS B8380-2002  氣壓液動.控制閥門和其他元部件出口和控制機構的鑒定 Pneumatic fluid power -- Identification of portscontrol mechanisms of control valvesother components
JIS B8376-1994  氣動速度控制閥 Speed control valves for pneumatic use
JIS B8387-2000  液壓動力.四孔調節閥門和四孔方向控制閥門.02,03,05尺寸.夾持尺寸 Hydraulic fluid power -- Four-port modular stack valvesfour-port directional control valves, sizes 02, 0305 -- Clamping dimensions
JIS B8375-2-2000  氣動液壓.五孔定向控制閥.第2部分:帶備用電接頭的安裝界面 Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector
JIS B8664-2001  液壓動力.壓力控制閥不包括減壓閥、順序活門、釋荷閥、節流閥和止回閥.安裝表面 Hydraulic fluid power -- Pressure-control valves excluding pressure-relief valves, sequence valves, unloading valves, throttle valvescheck valves -- Mounting surfaces
JIS B8659-1-2000  液壓動力.電氣調節液壓控制閥門.第1部分:四路直流控制閥門的試驗方法 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves
JIS B2007-1993  工業過程控制閥.檢驗和常規試驗 INDUSTRIAL-PROCESS CONTROL VALVES - INSPECTION AND ROUTINE TESTING
ISO 10770-2-1998  液壓傳動.電模式液壓控制閥.第2部分:三向流動控制閥的試驗方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves
ISO 5599-3-1990  氣壓傳動.五口控制閥.第3部分:閥門功能交換的編碼體系 Pneumatic fluid power; five-port directional control valves; part 3: code system for communication of valve functions
ISO 7790-1997  液壓傳動.規格為03和05型的四油口標準設計疊閥和四油口定向控制閥.緊固尺寸 Hydraulic fluid power - Four-port modular stack valvesfour-port directional control valves, sizes 02, 0305 - Clamping dimensions
ISO 11727-1999  氣流動力.控制閥和其它元件的控制機械裝置和氣門的識別 Pneumatic fluid power - Identification of portscontrol mechanisms of control valvesother components
ISO 5599-2-2001  氣壓液動.五通方向控制閥.第2部分:任選電氣連接器的安裝接口面 Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector
ISO 15407-1-2000  18mm和26mm五氣口氣動方向控制閥.第1部分:無插頭安裝界面 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm26 mm - Part 1: Mounting interface surfaces without electrical connector
ISO 6263-1997  液壓傳動.補償式流量控制閥.裝配面 Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
ISO 4401-1994  液壓傳動.四油口定向控制閥.裝配面 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
ISO 15407-2-2003  氣壓傳動.五氣口方向控制閥,規格18mm和26mm.第2部分:可任選連接器的安裝接口 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm26 mm - Part 2: Mounting interface surfaces with optional electrical connector
ISO 5599-1-2001  氣壓液動.五通定向控制閥.第1部分:不帶電連接器的安裝接口表面 Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector
ISO 12238-2001  氣壓液動.方向控制閥門.轉換時間的測量 Pneumatic fluid power - Directional control valves - Measurement of shifting time
ISO 10770-1-1998  液壓傳動.電模式液壓控制閥.第1部分:四向流動控制閥的試驗方法 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves
IEC 60534-8-3-2000  工業過程控制閥.第8-3部分:噪聲的考慮.控制閥的氣動噪聲預測法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method
IEC 60534-8-2-1991  工業過程控制閥.第8部分:噪聲問題.第2節:由通過控制閥的液力流產生的噪聲的實驗室測量 Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves
IEC 60534-2-3-1997  工業過程控制閥.第2-3部分:流通能力.試驗規程 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
IEC 60534-8-1-1986  工業過程控制閥.第8部分:噪聲的考慮.第1節:流經控制閥的氣動流產生的噪聲的實驗室測量 Industrial-process control valves. Part 8 : Noise considerations. Section one - Laboratory measurement of noise generated by aerodynamic flow through control walves
IEC 60534-3-3-1998  工業過程控制閥.第3部分:尺寸.對接焊的兩向閥,球型閥,直接圖形控制閥的首尾相接尺寸 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
IEC 60534-6-1-1997  工業過程控制閥.第6部分:定位器裝到控制驅動器的安裝細則.第1節:線型致動器上定位器安裝 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators
IEC 60534-3-1-2001  工業過程控制閥.第3-1部分:尺寸.法蘭面對面尺寸,兩路,直型和法蘭中心對面尺寸,兩路,球形,角型控制閥門 Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight patterncentre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
IEC 60534-6-2-2000  工業過程控制閥.第6-2部分:定位器聯接到控制閥的安裝細則.環行執行機構定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators
IEC 60534-3-1976  工業過程控制閥.第3部分:尺寸.第1節:二通球形控制閥的法蘭端面距 Industrial-process control valves. Part 3 : Dimensions. Section One: Face-to-face dimensions for flanged, two-way, globe-type control valves.
IEC 60534-1-1987  工業過程控制閥.第1部分:控制閥術語和一般原理 Industrial-process control valves. Part 1: Control valve terminologygeneral considerations.
IEC 60534-2-4-1989  工業過程控制閥.第2部分:流通能力.第4節:天然流動特性和量程范圍 Industrial-process control valves; part 2: flow capacity; section four: inherent flow characteristicsrangeability
IEC 60534-7-1989  工業過程控制閥.第7部分:數據表 Industrial-process control valves; part 7: control valve data sheet
IEC 60534-4-1999  工業過程控制閥.第4部分:檢驗和常規試驗 Industrial-process control valves - Part 4: Inspectionroutine testing
QC/T復審  汽車動力轉向控制閥總成技術條件 　
QC/T復審  汽車動力轉向控制閥總成臺架試驗方法 　
GB/T17213.12-2005  工業過程控制閥 第3-3部分：尺寸 對焊式兩通球形直通控制閥的端距 　
GB/T17213.4-2005  工業過程控制閥 第4部分：檢驗和例行試驗 　
GB/T17213.6-2005  工業過程控制閥 第6-1部分：定位器與控制閥執行機構連接的安裝細節 定位器在直行程執行機構上的安裝 　
GB/T17213.13-2005  工業過程控制閥 第6-2部分：定位器與控制閥執行機構連接的安裝細節定位器在角行程執行機構上的安裝 　
GB/T17213.14-2005  工業過程控制閥 第8-2部分：噪聲的考慮 實驗室 內測量液動流流經控制閥產生的噪聲 　
GB/T17213.15-2005  工業過程控制閥 第8-3部分：噪聲的考慮 空氣動力流流經控制閥產生的噪聲預測方法 　
GB/T17213.16-2005  工業過程控制閥 第8-4部分：噪聲的考慮 液動流流經控制閥產生的噪聲預測方法 　
GB/T17213.2-2005  工業過程控制閥 第2-1部分：流通能力 安裝條件下流體流量的計算公式 　
GB/T17213.9-2005  工業過程控制閥 第2-3部分：流通能力 試驗程序 　
GB/T17213.10-2005  工業過程控制閥 第2-4部分：流通能力 固有流量特性和可調比 　
GB/T17213.3-2005  工業過程控制閥 第3-1部分：尺寸 兩通球形直通 控制閥法蘭端面距和兩通球形角形 控制閥法蘭中心至法蘭端面 　
GB/T17213.11-2005  工業過程控制閥 第3-2部分：尺寸 角行程控制閥蝶閥除外的端面距 　
MT/T復審  液壓支架用自動噴霧控制閥通用技術條件