污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
埃馬克（中國）機械有限公司
埃馬克（中國）機械有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
聯系方式：查看聯系方式
更新時間：2025-01-06 08:41:58瀏覽次數：36次
聯系我時，請告知來自 環保在線When it comes to end machining shafts, the machines in the VT series with center drive are the ideal manufacturing systems. The four-axis machining offered by the VT machines guarantees highly efficie......
The machines in the VT series are an interesting proposition for shafts manufactured in medium to high volumes. This includes transmission shafts, rotor shafts, pump shafts, engine shafts and many more. The VT machines – specifically the center-drive machines – can handle shafts with lengths of up to 540 mm and diameters of up to 80 mm.
The large machining area offered by the VT machine as well as the generous travel path of the two vertically attached tool turrets mean that simultaneous machining of the two shaft ends is always possible. For longer workpieces, an additional steady rest can be easily used.
For machining shaft ends, the machines in the VT series can also be equipped with a center drive – as can be seen from the name VTC 200 CD (center drive). The shafts are then also clamped in this center drive. Depending on the workpiece, the shaft is clamped on one or two clamping planes using collets or clamping jaws inside the center drive. Clamping is performed mechanically using springs. The clamp is released hydraulically.
| Workpiece length, max. | mm in | 540 21.5 |
| Workpiece dia., max. | mm in | 80 3 |
Rotor Shaft - Assembled (Electric Motor)
Steering pinion
Drilling
Vertical turning
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
