當前位置：四川川大干燥科技工程有限責任公司>>混料類Mixing Equipment>>二維混合機2D Motion Mixer

二維混合機2D Motion Mixer

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2022-11-30 18:03:19瀏覽次數：242次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  混料類Mixing Equipment

全部產品列表

暫無信息

四川川大干燥科技工程有限責任公司

經營模式：其他

商鋪產品：26條

所在地區：

詢價 給他留言

產品簡介

二維混合機2D Motion Mixer

詳細介紹

一、工作原理及應用范圍介紹Introduction of Working Principle and Scope of Application

二維混料機主要由轉筒、擺動架、機架三大部分構成。轉筒裝在擺動架上，由四個滾輪支撐并由兩個傳動輪對其進行軸向定位。在四個支撐滾輪中，其中兩個傳動輪由轉動動力系統拖動使轉筒產生轉動；擺動架由一組曲柄擺桿機構來驅動讓轉筒作上下運動，曲柄擺桿機構裝在機架上，擺動架由軸承組件支撐機架上。

廣泛運用于：制藥廠的總混機，食品、化工、飼料、粉末冶金等行業大批量混料。

2D mixer is mainly composed of a drum, a swing frame and a rack. The drum is installed on the swing frame, supported by four rollers, and positioned by two driving wheels on the axle direction. Among four supporting rollers, two of them are dragged by rotating power system; the swing frame is drove by one group of crank rocker mechanism to make the drum moving up and down; the crank rocker mechanism is installed on the rack, and swing frame is supported by the bearing assembly on the rack.

It is widely applied in the mixing assembly of pharmaceutical factory, and large batch mixing of food, chemical, feed, and powder metallurgy industries.

二、特點 Characteristics

1.設備結構簡單，占地占空間小，自動出料且出料干凈。

2.容器內可據工藝需要加設抄板，用以強化混料效果。

3.運行平穩，清潔方便。

4.根據工藝需要，可滿足大批量的總混。

1.The equipment is simple in structure, small in floor area, automatic and clean in discharge.

2.The shoveling plate may be set in the container as per the process requirement to strength the mixing efficiency.

3.It is stable in operation and convenient for clean.

4.It can meet the total mixing of large batches as required by the process.

三、外形簡圖Dimension sketch

二維混合機