當前位置：青島密克朗粉體機械有限公司>>粉碎設備>>MSM系列高速剪切混合機固廢粉碎設備

MSM系列高速剪切混合機固廢粉碎設備

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：曾經理查看聯系方式

更新時間：2023-09-21 09:52:38瀏覽次數：320次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  粉碎設備

全部產品列表

暫無信息

青島密克朗粉體機械有限公司

經營模式：其他

商鋪產品：27條

所在地區：

聯系人：曾經理

詢價 給他留言

產品簡介

MSM系列高速剪切混合機

詳細介紹

Precisely American Technology Perfect German Quality

MSM系列高速剪切混合機High speed shear mixer

高速剪切混合機是一種高速槳葉式混合機，適用于對粘性粉末進行高強度混合?；旌显砘诟呒羟辛透邲_擊力組合，可適用于多種物料應用。快速、混合(混合時間30秒至5分鐘)全自動卸料倉產品區域無軸承或密封，產品溫度有效控制，可選擇真空設計。

High speed shear mixer is a high-speed paddle type mixer suitable for high-strengthmixing of viscous powders. The nixing principle is based on a conbination of highshear force and high imact fores, and can he applied to various material applications.Quick and thorough mixing (aixing tine 30 seconds to 5 minutes): The fully autonaticunloading bin product area has no bearings or seals, and the produet tenperatureis effectively controlled. Vacuun design can be selected.

高速剪切混合機通過混合元件與內壁之間的共同作用使物料高度混合，與現有的混合技術不同。混合容器采用錐形設計并配有中間轉子，轉子葉尖速度可達30m/s。物料在圓頂蓋引導下，向混合機中心移動，隨后其頂部沖擊葉將粘性粉末和液體分散并控制顆粒尺寸?；旌蠙C的混合機構可確保產品混合均勻，時間短。

The high-speed shear mixer uses the combined action between the mixing elements andthe iner wall to achieve high mixing of naterials, which is completely differentfrom existing nixing technologies. The mixing container adopts a conical design and isequipped with an intermediate rotor, with a rotor tip speed of up to 30m/s. Underthe guidance of the done cover, the material moves towards the center of the mixer,ａnd then its top impact blades efficiently disperse the viscous powder and liquidａnd control the particle size. The mixing mechanism of the mixer ensures uniformproduct mixing and short time.

轉子轉動過程中形成離心力，將產品推至容器壁，設備中間有一個頂部驅動的高速轉軸，在軸上裝有緊貼內壁的漿式混合元件。通過高速旋轉的攪拌槳和錐形內倉的共同作用將產品由底部帶至混合倉的上部，隨即又回落至混合倉底部，此種流動方式形成一種快速的宏觀混合。另外，通過混合腔體的夾套可以實現對產品溫度的控制。

During the rotation of the rotor, centrifugal force is formed to push the produet onto the container wall. In the middle of the equipment,there is a high-speed shaft driven at the top, which is equipped with a slurry mixing element that is tightly attached to the innerwall. The produet is carried from the bottom to the upper part of the mixing chanber by the combined action of a high-speed rotatingstirring paddle and a conical inner chamber, and then falls back to the bottom of the mixing chamber, forming a rapid macroscopie mixingprocess.In addition, the temperature of the produet can be controlled through the jacket of the mixed cavity.

產品型號	體積	腔體直徑	腔體高度	腔體總高	卸料口尺寸	電機功率
MSM-5	5L	300mm	190mm	280mm	80mm	0.75-5.5kw
MSM-15	15L	500mm	360mm	680mm	100mm	1.5-15kw
MSM-50	50L	650mm	500mm	720mm	150mm	4-30kw
MSM-150	150L	900mm	820mm	870mm	200mm	11-75kw
MSM-500	500L	1400mm	1190mm	1210mm	300mm	30-110kw