FTJ-301A全封閉自動組織脫水機用于生物組織常規切片制作的脫水階段，能按預先設定的工作程序進行全自動的組織脫水工作，大量節省操作人員的工作時間，提高工作效率和工作質量。該產品主要用于醫院的病例診斷、醫科院校的教學和生物醫學研究機構等單位。全封閉脫水機打破傳統的脫水模式，組織始終處于處理缸中，試劑和組織始終處于封閉狀態，環保、安全是脫水機的發展趨勢。

詳細介紹

FTJ-301A全封閉自動組織脫水機

主要用途：

FTJ-301A全封閉自動組織脫水機用于生物組織常規切片制作的脫水階段，能按預先設定的工作程序進行全自動的組織脫水工作，大量節省操作人員的工作時間，提高工作效率和工作質量。該產品主要用于醫院的病例診斷、醫科院校的教學和生物醫學研究機構等單位。全封閉脫水機打破傳統的脫水模式，組織始終處于處理缸中，試劑和組織始終處于封閉狀態，環保、安全是脫水機的發展趨勢。

該產品是利用液體泵將處理缸抽真空，使溶劑被吸入處理缸對組織進行脫水，通過電器控制旋轉電磁閥，依次經過10種處理液對組織脫水，然后經過3次石蠟浸入，后經過3中溶劑的清洗完成整個脫水過程。電器部分采用人工控機控制，觸摸屏顯示，高級語言編程，人機界面友好，操作簡單易學，有多套處理程序和清洗程序可供選擇，處理過程實時地動畫顯示，清晰明了。

The product is used for making conventional sections of biological tissue dewatering stage, full automatic tissue dehydration work according to the preset working procedure and save a lot of working hours of operation personnel, improve the efficiency and quality of work. This product is mainly used in the case diagnosis of the hospital, medical colleges and universities teaching and biomedical research institutions and other units. Fully enclosed dewatering machine breaks the traditional mode of dehydration, the organization is always in the treatment of the cylinder, the reagent and the organization is always in a closed state, environmental protection, safety is the development trend of the dewatering machine.

The product is using liquid pump will handle the cylinder vacuum, solvent is sucked into the cylinder of tissue dehydration, according to the electrical control rotary solenoid valve, followed by 10 kinds of treatment solution for dehydration of tissue and immersed in paraffin after three times, finally after 3 solvent cleaning to completed the whole process of desiccation. Electrical part adopts manual control machine control, touch screen display, high-level language programming, friendly man-machine interface, easy and simple operation, multiple sets of processing and cleaning procedures for selection and processing of real-time animation display, clarity.

主要性能特點
1.采用嵌入式系統為主控制單元，程序化程度高，工作穩定，菜單結構合理；
2.手動模式中動態演示換液過程，清晰明了；
3.觸摸式液晶屏顯示，美觀實用；
4.可預存多套程序，調入方便，更改簡單，自動排序；
5.程序預約工作時間可任意設定，比傳統延時設置擴大了設置范圍；
6.任意溶劑處理過程可自由選擇正壓、負壓或交替加快處理進程；
7.醋缸加熱采用數字控制，溫控程序高，304不銹鋼材質，耐腐蝕。

【Main performance characteristic】
1.The embedding system,for main control unit,it provides high degree of routinization and stability work,rhe logical structure;
2.It clearly to see the procedure of the dynamic process manually;
3.Big LCD screen display and touch key-press;
4.It can be stored of numbers of program,it convenient to adjust,change and order the program automatically;
5.Working time of process reservation can be free set,it is expand the scopeof the setting than the traditional delay setting;
6.It free to select barotropy and negative pressure process or expedit the dealing procedure alternation for any dealing procedure of regent;
7.Digital control for wax cylinder heating,high degree of temperature control,the stainless steel with good function of corrosion resisting.

技術指標

1.額定電壓：AC 220V±22V 50Hz±1Hz；
2.額定功率：1400VA
3.脫水缸數量：10個，容量：4.5L；
4.脫水缸溫度：環境溫度~99℃；
5.脫水缸溫控精度：±5℃；
6.試劑容量數量：14個（其中3個清洗液，1個廢液回收，10個處理液）4L/個；
7.石蠟容器：數量3個，每個容量3L；
8.石蠟缸溫度：環境溫度～99℃；
9.石蠟缸溫控精度：±5℃；
10.樣本藍：3個，處理量350塊；
11.活性炭過濾容器：1個；
12.自動裝液及抽排系統：用于試劑盒石蠟；
13.操作程序：可儲存十個以上；
14.清潔循環程序：3個（用戶可改編）；
15.手動程序：單個試劑執行；
16.自動程序：針對不同組織任意設定；
17.石蠟溫度范圍：環境溫度到99℃任意設定（初始設定65℃）；
18.試劑溫度范圍：環境溫度到99℃任意設定（初始設定45℃）；
19.外形尺寸：600mm*676mm*1340mm
20.整機重量：85kg。

【FTJ-301A AUTOMATIC TISSUE PROCESSOR】
Technique Parameter:
1.Voltage rating:AC 220V±22V 50Hz±1Hz；
2.Power rating:1400VA;
3.Dehydrate cylinder Quantity:10,Capacity:4.5L;
4.Dehydrate cylinder temperature:Environment temperature-99℃;
5.Dehydrate cylinder temperature controlling accuracy:±5℃；
6.Reagent container No.Quantity:14(clening fluid:3,waste lquor recovery:1,treating fluid:10)4L/each one;
7.Olefin container Quantity:3,each Capacity:3L;
8.Olefin cylinder temperature:Room temperature-99℃；
9.Olefin cylinder temperature controlling accuracy:±5℃；
10.Sample basket:3,Each can accommodate a sample of 350;
11.Active carbon filtrate container:1;
12.Fluid automaticacally and a platoon system Used by reagent and olefin;
13.Operating programme:It can be storage over ten;
14.Cleanliness cycle programme:3(can be revise bu the user);
15.Manual programme:operatul for seppecial reagent;
16.Auto programme:set for different tissue when weed;
17.Temperature range of olefin:Room temperature to 99℃ freesetting(at the beginning of setting is 65℃);
18.Temperature range of reagent:Room temperature to 99℃ freesetting(at the beginning of setting is 45℃);
19.Outer Dimension:600mm*676mm*1340mm;
20.Weight of the whole machine:85kg.