主要特點

•采用原點定位技術，無響應速度限制，可靠性更高

•任意位置清零(ON/0)

•公英制轉換((mm/in)

•測量時，按下M鍵，進入HOLD狀態，屏幕保留此時的測量值

•記錄連續測量過程中的值(MAX)

•記錄連續測量過程中的最小值(MIN)

•記錄連續測量過程中的值(MAX)與最小值(MIN)之差(△＝MAX-MIN)，用于平面度和同軸度的測量

•測量過程中根據設置的上下極限尺寸自動判定工件是否合格(TOL)，不依賴操作人員的記憶

•以方式測量(ABS)，量表讀出來的數據即為工件的實際尺寸

•以相對方式測量(REL)，量表讀出來的數據不是工件的實際尺寸，只是一個相對值

•測量的數據可通過數據采集系統進行數據傳輸(DATA)

•USB數據線插頭和電池蓋板都用螺釘緊固，保證連接更可靠

FEATURES

•Reliable absolutely locating system ,no speed limited

•Zero-setting at any position (ON/O)

•mm/inch conversion at any position(mm/in)

•press M button ,LCD holds the measuring result (M)

•Hold the max reading during measurement (MAX)

•Hold the  minimum reading during measurement (MIN)

•Tracing the balance between Max and Min value (△=MAX—MIN)

•TOL Setting can check if the item is regular (TOL)

•Absolute zero measurmrnts

•Relative zero measurements

•Measuring value can be transmitted to PC (DATA)

•Screw USB interface and battery cover