污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
蘭州海蘭德泵業有限公司
蘭州海蘭德泵業有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地
聯系方式：查看聯系方式
更新時間：2022-07-01 15:06:43瀏覽次數：187次
聯系我時，請告知來自 環保在線CAY型磁力驅動離心油泵CAYMagneticDrivenCentrifugalOilPumpCAY型磁力驅動離心油泵，旨在輸送不含固體顆粒的石油、液化氣等要求無泄漏或不允許密封污染的介質，特別是輸送高溫、高壓、易燃、易爆或有毒的液體
CAY型磁力驅動離心油泵，旨在輸送不含固體顆粒的石油、液化氣等要求無泄漏或不允許密封污染的介質，特別是輸送高溫、高壓、易燃、易爆或有毒的液體。適合于石油精制、石油化工和化學工業等工業系統中。
CAY型泵是在AY型油泵基礎上改造設計的無泄漏全密封磁力泵，其結構形式、安裝尺寸和性能參數范圍與AY油泵相同。
CAY magnetic driven centrifugal oil pump is designed to conveymedia such as petroleum solid particle free and LPG requiring freedom ofleakage or no contamination by sealing, especially high temperature, highpressure, inflammable and explosive or toxic liquid. It is suitable for servicein petroleum refining, petrochemical and chemical industrial systems.
CAY pump is aleakage free and fully enclosed magnetic pump renovated and designed on thebasis of Model AY oil pump, and its structural form, installation dimensionsａnd performance parameter ranges are identical to those of AY oil pumps.
結構說明 Structure of CAY
1.CAY型泵為單級/兩級單吸懸臂式離心油泵，磁力驅動全密封，無泄漏。
2.殼體徑向剖分，泵安裝的支撐面在軸心線的水平面上，泵的進出口均垂直向上。
3.泵的軸向力由葉輪上的平衡孔或葉輪對稱布置達到平衡，殘余軸向力由推力軸承來承受。
4.內置滑動軸承的潤滑方式為工藝液體自潤滑。
5.外部軸承體外表面鑄成有散熱片，輸送介質溫度小于120℃時，可采用空氣冷卻，溫度在120～260℃之間，可選用風扇冷卻，溫度大于260℃時應采用水冷卻。
6.采用膜片式加長聯軸器部件，以便于檢修。
7.從原動機端看，泵為逆時針方向旋轉。
1.CAY pump is single/two-stage single suction cantilevercentrifugal oil pump, driven by magnetic force, fully enclosed and free ofleakage.
2.The casing is split radially; the pump mounting support surfaceis on the horizontal plane of the axial line, and both inlet and outlet of thepump face vertically upwards.
3.The axial force of the pump is balanced by the balance holeson the impellor or symmetric arrangement of impellor, and the residual thrustis taken by the thrust bearing.
4.The built-in sliding bearings are self-lubricated by processliquid.
5.The outer surface of external bearings is cast with radiatingfins, and it can be cooled by air when the temperature of conveying liquid isbelow 120℃, by fan whenthe temperature is between 120~260℃, and should becooled with water when the temperature is over 260℃.
6.Diaphragm extended coupling is used to facilitate maintenance.
7.The pump rotates in anti-clockwise direction when viewed fromthe primer side.
性能范圍 Scope ofperformance
流量 Flow 2.5～500m3/h
揚程 Head 38～240m
溫度 Temperature -45℃～+450℃
進口直徑 Import diameter 40～250mm
工作壓力 The max working pressure 4MPa
型號意義Type denotation
CAY型譜圖 Spectrumof Model CAY
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
