進口高壓旁路調節閥德國洛克造產品名稱進口高壓旁路調節閥產品型號 LOCKE產品品牌德國《LOCKE》洛克產品包裝木箱驅動方式電動公稱通徑DN125~DN300連接方式法蘭、螺紋、焊接公稱壓力32.0Mpa ≤5000PSI結構形式直通式、平衡式適用溫度≤550℃閥體材質鑄鐵,鑄鋼,不銹鋼制造標準德國洛克原廠標準適用介質蒸汽等
進口高壓旁路調節閥 德國洛克造
產品名稱 | 進口高壓旁路調節閥 | 產品型號 | LOCKE |
產品品牌 | 德國《LOCKE》洛克 | 產品包裝 | 木箱 |
驅動方式 | 電動 | 公稱通徑 | DN125~DN300 |
連接方式 | 法蘭、螺紋、焊接 | 公稱壓力 | ≤5000PSI |
結構形式 | 直通式、平衡式 | 適用溫度 | ≤550℃ |
閥體材質 | 鑄鐵,鑄鋼,不銹鋼 | 制造標準 | 德國洛克原廠標準 |
適用介質 | 蒸汽等。 |
應用場合 | 電站、冶金、建筑、鍋爐、設備、管道、熱能、空調、消防、給排水、水處理、石油化工、造紙印刷廠。 |
產品 | 面議,電議(歡迎 --) |
產品 | |
生產廠家 | 德國洛克閥門國際集團 |
代理 | 上海衡意流體控制有限公司 |
進口高壓旁路調節閥產品描述:
德國《DE LOCKE》洛克--進口高壓旁路調節閥是一種結構新穎的特殊高壓差調節閥,它兼有啟動調節閥,減壓旁路閥和安全閥的作用,該閥可實現快速自動跟蹤超壓保護,省去鍋爐安全閥。
該閥能再六秒內實現快速啟動,電動執行機構的控制系統通過調節蒸汽壓力以適應機組不同工況的滑參數啟停和運行;機組甩負荷后鍋爐可以不立即熄火,等事故排除后,幾分鐘內即可重新投入運行,既減少鍋爐的啟停次數,又減少了對汽輪機的熱沖擊,減溫水的調節與高壓旁路快速聯動,能大幅度降溫降壓,減少電廠龐大的減溫減壓系統及設備。所以該閥是大容量單元再熱機組旁路系統的重要調節閥之一。
The high-pressure by-pass control valve imported from lockrock, Germany, is a special high-pressure differential control valve with novel structure. It has the functions of start-up control valve, pressure reducing by-pass valve and safety valve. The valve can realize fast automatic tracking and overpressure protection without boiler safety valve.
The valve can start quickly in another six seconds, and the control system of the electric actuator can adjust the steam pressure to adapt to the sliding parameter start-up, stop and operation of the unit under different working conditions; After the load rejection of the unit, the boiler can not be put out immediately, and can be put into operation again in a few minutes after the accident is eliminated, which not only reduces the number of boiler start-up and shutdown, but also reduces the thermal impact on the steam turbine. The regulation of desuperheating water and high-pressure bypass are linked quickly, which can greatly reduce the temperature and pressure, and reduce the huge desuperheating and decompression system and equipment of the power plant. Therefore, the valve is one of the important regulating valves in the bypass system of large capacity unit reheat unit.
進口高壓旁路調節閥產品優點:
蒸汽經過4級節流,噪音低。蒸汽先通過套筒和閥座,壓力降低了一部分。節流罩下端的噴嘴向上噴出高速冷卻水,冷卻水在節流罩中心被高壓蒸汽霧化和混合的過程中,進行充分的熱交換,從而使高溫蒸汽再節流罩內完成降溫過程,然后通過節流罩,再通過兩個節流孔板,把蒸汽壓力降低到額定要求,由于蒸汽的減壓減溫都在同一閥體內完成,故系統不另設的減溫器。
高壓旁路控制系統能使這臺閥在6秒內快速啟動,正常工況采用慢速調節。
上閥蓋采用自密封結構,可防止蒸汽外溢。
閥內組件經過表面硬化處理,硬度可達到HRC70左右,蝕性能好,使用壽命長。
閥關閉緊密,達到單座閥的泄露標準。
對連接管道無任何特殊要求。