手動平衡閥及靜態平衡閥原理與特點:

靜態平衡閥是一種具有數字鎖定特殊功能的調節型閥門，采用直流型閥體結構，具有更好的等百分比流量特性，能夠合理地分配流量，有效地解決供熱（空調）系統中存在的室溫冷熱不均問題。丹富斯靜態平衡閥同時能準確地調節壓降和流量，用以改善管網系統中液體流動狀態，達到管網液體平衡和節約源的目的。丹富斯閥門設有開啟度指示、開度鎖定裝置及用于流量測定的測壓小閥，只要在各支路及用戶入口裝上適當規格的平衡閥，并用智能儀表進行一次性調試后鎖定，將系統的總水量控制在合理的范圍內，從而克服了“大流量，小溫差”的不合理現象。 既可安裝在供水管上，也可以安裝在回水管上，一般要安裝在回水管上，尤其對于高溫循環，為方便調試，更要裝在回水管上，安裝了平衡閥的供（回）水管就不用再安裝截止閥。

Manual balancing valve and the principle and characteristics of static balance valve:

Static balancing valve is a kind of external regulation valve with digital lock special functions, adopts dc type valve body structure, has better equal percentage flow characteristic, to reasonably allocate bandwidth, effectively solve the heating (air conditioning) room temperature is uneven and problems that exist in the system. Dan fuss static balancing valve can accuray adjust the pressure drop and flow, at the same time to improve fluid flow state in pipeline system, achieve the goal of pipeline fluid balance and save the source. Dan fuss valve opening instructions, opening the lock and a small valve used for flow measurement of pressure, as long as in the selection and user entry fitted with appropriate specifications of the balance valve, with special inligent instrument for the disposable lock after debugging, the system of the total water control in a reasonable scope, thus overcome the "big flow rate, small temperature difference" unreasonable phenomenon. Can be installed on the water supply pipe, also can be installed on the return pipe, generally to be installed on the return pipe, especially for high temperature cycle, in order to facilitate debugging, more on the return pipe is loaded, installed the balancing valve for (back) to the pipe don't have to install the valve.

丹富斯靜態平衡閥造價低，采用*的Y型設計，具多回轉刻度調整、顯示開度范圍，提供*的控制能力，可對整個循環水或空調系統進行的控制，使整個系統達到所需求的流量平衡。廣泛應用于冷、熱水系統，可使能源得到有效的運用，以達到節能及提高供熱（冷）效率的目的。元件使用壽命長等優點，對支路不多的小型管網也可方便進行水力工況平衡。對于熱源主動變量管網只能采用手動平衡閥，因?yàn)橹挥惺謩?dòng)平衡閥才能保證流量的一致等比變化.

Dan rich static balance valve, low cost, USES the advanced Y type design, showing the opening range multi-turn scale adjustment, and provide the best control ability, to the circulating water or air conditioning system for precise control of the whole system meet the traffic demand of the balance. Widely used in cold and hot water system, can make effective use of energy, in order to achieve energy saving and to enhance the efficiency of the heat (cold). Components advantages of long service life, branch of the few small network can also be convenient for working condition of hydraulic balance. For active variable heat pipe network can only adopt manual balance valve, because only the manual balancing valve can ensure consistent geometric change in the flow.

丹富斯靜態平衡閥指示； 　　

  有開度鎖定裝置，非管理人員不能隨便改變開度；表連接，可方便地顯示閥門前后的壓差及流經閥門的流量。盡管平衡閥具有很多優點，但它在空調水系統的應用還存在不少問題。如果這些問題解決不好，平衡閥的特點并不能充分顯現出來。平衡閥的作用是為了調節系統內，各個分配點的（如每一個樓座）的預定流量。每一座樓的入口處都安裝平衡閥，可以使供暖系統的總流量得到合理分配。首先看和管徑相同的靜態平衡閥zui大流量能否滿足設計流量，如果滿足設 計流量就行。不滿足就放大一個口徑。靜態平衡閥就是一個截止閥，只不過行程做的很長，容易控制流量。

Dan fuss static balancing valve indicator;

Opening the lock, the managers can't literally change the opening; Table joins, can easily show before and after the valve pressure difference and flow through the flow valves. Despite the balancing valve has many advantages, but its application in air conditioning water system still exist some problems. If these problems is not good, the characteristics of the balancing valve is not fully revealed. Balancing valve is used to adjust in the system, each distribution point, such as each building block due to traffic. Every building at the entrance to the balancing valve installation, can make the total flow of heating system reasonable allocation. First look and the diameter of the same static balancing valve can meet the design flow, maximum flow rate if meet the design flow rate. Does not meet the amplifying a caliber. Static balancing valve is a valve, just a long trip, easy to control flow.