當前位置：珠海康寶萊儀表有限公司>>美國Ronan諾南控制產品>>諾南Ronan泄漏檢測產品>>LS立式液體傳感器

LS立式液體傳感器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號LS-1 或 LS-3

品牌

廠商性質生產商

所在地珠海市

在線詢價收藏產品查看聯系電話

聯系方式：葉先生查看聯系方式

更新時間：2022-08-02 15:28:42瀏覽次數：846次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  美國Ronan諾南控制產品

諾南Ronan非接觸式測量產品

諾南Ronan報警顯示產品

諾南Ronan輸入/輸出模塊

諾南Ronan泄漏檢測產品

全部產品列表

暫無信息

珠?？祵毴R儀表有限公司

經營模式：生產廠家

商鋪產品：426條

所在地區：廣東珠海市

聯系人：葉先生（銷售經理）

詢價 給他留言

產品簡介

LS-1 或 LS-3立式液體傳感器Wetted Parts: 304 and 316 Stainless Steel, Buna-N, Polysulfone, PVC, Teflon Mounting: 1/2 inch NPT, male Switch Rating: SPST, 20VA, 120-240 Vac pilot duty Operating Temperature: -40

詳細介紹

LS-1立式液體傳感器

All LS-1 and LS-3 sensors have user selectable logic and may be installed in wet or dry conditions. Liquid collection or loss, sufficient to move the float will transmit a signal to the control panel to initiate control functions or annunciate alarms. The sensor design allows rigid or flexible mounting to allow easy periodic testing as required by many regulatory agencies. The sensor may be mounted loosely suspended by its cable or rigid with the 1/2 inch NPT nipple.

LS-3立式液體傳感器

Ronan LS-1 and LS-3 Sensors operate on a direct principle. A glass encapsulated hermetically sealed reed switch is embedded within the sensor stem. Permanent magnets within the sensors float create a magnetic field which surrounds the reed switch holding the switch closed. When the magnetic field is removed by movement of the float, the reed switch is actuated, thereby changing the state. This condition either opens a closed switch or closes an open switch. This change in state is then signaled to the control panel.

關鍵詞：傳感器