污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
深圳爾達盛傳感科技
參 考 價 | 面議 |
產品型號
品 牌
廠商性質經銷商
所 在 地
聯系方式:湛忠梅查看聯系方式
更新時間:2024-06-28 09:15:54瀏覽次數:79次
聯系我時,請告知來自 環保在線Features?HART™digitalcommunication?Betterthan+/-0
Features
? HART™ digital communication
? Better than +/- 0.5% combined error
? 4 - 20 mA loop-powered output
? 0 - 25 to 0 -10,000 psi
? Explosion Proof, ATEX/Intrinsically Safe approved
? Meets PED and CE requirements
Benefits
? Configurable via handheld
? Precise repeatable pressure measurements
? Output supplied directly to DCS or PLC
? Customer defined pressure ranges
? Approved for hazardous environments
? Meets new EC requirements
Description
TEMPERATURE & MECHANICAL CHARACTERISTICS
Max Diaphragm Temperature: 600oF (315oC)
Zero Shift (due to temperature change):
1 psi/100oF Typical (from 75 to 450oF)
2 psi/100oF Typical (from 450 to 600oF)
Electronics Operating Temperature:
-20o to 185oF (-29o to 85oC)
Effects over Compensated Temperature Range of
0o to 150oF (-18o to 65oC) - Zero & Span (each):
0.01% FS/oF max (0.02% FS/oC max)
Mounting Bolt Torque: 125 inch/lbs. maximum
Standard Wetted Parts: Dymax® coated 15-5 PH SST
PERFORMANCE CHARACTERISTICS
Output: 4 - 20 mA, with optional HART™
Input Voltage: 16 - 36 Vdc (Standard)
16 - 30 Vdc (ATEX & Intrinsically Safe Applications)
Combined Error: +/- 0.5% FSO
(Including Linearity, Repeatability & Hysteresis)
Repeatability: +/- 0.1%FSO
Rangability: 3:1 Turndown
Over Pressure: 2 X FSO < 7,500 psi;
1.5 x FSO for 10,000 psi
Zero Balance Adjustment Range: -40% to +10%;
-80% to +20% for < 500 psi
Load Resistance: 500 Ω @ 26 Vdc, 1000 Ω @ 36 Vdc
The SPX2291 is a smart 4 - 20 mA button seal pressure transmitter designed for use in hazardous
locations. The SPX2291 is all welded construction that features a large diaphragm and mounting flange
for easy installation. Optional thermocouple or RTD configurations are available to provide melt
temperature. The SPX2291E has explosion proof approval for Class 1, Division I, Groups A, B, C & D.
The explosion proof model employs a conduit fitting with 42" leads. The SPX2291S is ATEX/Intrinsically
Safe approved for II 1 G 100a Eex ia IIC, Zones 0 and 1. The intrinsically safe and ATEX models can be supplied with either a conduit fitting or a hermetic 6 pin Bendix connector.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
進口馬肚自吸式耐酸堿泵 美國卡洛特CARDLOTT 中國總代理
CARDLOTT 面議140MPa蓄能器-壓力容器-300mpa壓力罐-smt高壓壓力
smt, 貨號:34 面議環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
深圳爾達盛傳感科技