[中文名稱] 多來聚合氯化鋁（簡稱聚鋁）
[英文名稱] Polyaluminium Chloride，縮寫為PAC
[分 子 式] [AL2（OH）LnCL6-n]m
[技術標準] 產品質量符合國家GB15892-2009標準
[Technical standard] the product quality in line with national GB15892-2009 standard
[產品外觀] 金黃色、土黃色、褐色、紅色顆粒狀/片狀
[Product appearance] golden yellow, khaki, brown, red granular / flake
[產品形態]粉狀固體 液體
[Form] powdered solid liquid
1、聚（合）氯化鋁作用機理
1, poly （co-） mechanism of the role of aluminum chloride
聚（合）氯化鋁是一種無機高分子混凝劑，由于氫氧根離子的架橋作用和多價陰離子的聚合作用而生產的分子量較大、電荷較高的無機高分子水處理藥劑。分子式如下：[AL2（OH）nCL6-n]（n為1-5.m≤10） 鹽基度：B＝n/6×100％,其混凝作用表現如下： a、水中膠體物質的強烈電中和作用?！ 、水解產物對水中懸浮物的優良架橋吸附作用。 c、對溶解性物質的選擇性吸附作用。
Poly （aggregate） of aluminum chloride is an inorganic polymer coagulant, the larger the molecular weight of the production due to the bridging effect of the hydroxyl ions and polyvalent anion polymerization, higher charge inorganic polymer water treatment chemicals . Following formula: [Al2 （OH） nCL6-n] （n is 1-5.m ≤ 10） Basicity: B = n / 6 × 100%, its coagulation performance is as follows: a strong colloidal substances in the water neutralization. b hydrolyzate of suspended solids in the water excellent bridge adsorption. c, selective adsorption of soluble substances.
2、性能
2、Performance
a、凈化后的水質優于硫酸鋁混凝劑，凈水成本與之相比低15－30％。
a、purified water is better than aluminum sulfate coagulant, water purification costs compared with 15-30% lower.
b、絮凝體形成快、沉降速度快，比硫酸鋁等傳統產品處理能力大。
b、floc formation, sedimentation rate, processing power than traditional aluminum sulfate.
c、消耗水中堿度低于各種無機混凝劑，因而可不投或少投堿劑。
c、 the consumption of water alkalinity below various inorganic coagulant, which from time to vote or less cast alkaline agent.
d、適應的源水PH5.0-9.0范圍均可凝聚。
d、 the adaptation source water PH5.0-9.0 range can be condensed
e、腐蝕性小，操作條件好。
e、 corrosive and operating conditions
f、溶解性優于硫酸鋁。
f、the solubility is better than aluminum sulfate
g、對源水溫度的適應性優于硫酸鋁等無機混凝劑。
g、and the adaptability of the source water temperature is superior to the inorganic coagulant such as aluminum sulfate.
1、聚合氯化鋁主要用于飲用水和工業給水的凈化，以及工業廢水的處理。是目前生活給水、工業給水處理中應用的絮凝劑。
1、 PAC is mainly used for the purification of drinking water and industrial water supply, and industrial wastewater treatment. Living water to the most widely used in the water treatment industry flocculant.
2、聚合氯化鋁具有絮凝性良好，生成的礬花大、投藥量少、效率高、沉降快、使用范圍廣泛等優點。
2、PAC flocculation generated alum dosage, high efficiency, fast settlement, and the use of a wide range of advantages.
3、聚合氯化鋁可在低溫下使用，適宜PH值為5-9，投加后無需加堿，絮凝效果好，產泥少。
3、PAC can be used at low temperatures, suitable PH value 5-9 after dosing without alkali flocculation effect, less sludge production
4、聚合氯化鋁產品對處理水的適應強，尤其對高濁度水的處理效果更為顯著；水溫較低時仍能保持穩定的混凝效果。
4、PAC products on the adaptation of the treated water, especially for high turbidity water treatment effect is more significant; still maintain a stable water temperature is lower coagulation effect.
5、聚合氯化鋁可與弱陽離子聚丙烯酰胺配合，與硫酸鋁或三氯化鐵組合，用于污泥調制。
5、PAC and weak cation polyacrylamide with aluminum sulfate or ferric chloride combination for sludge modulation.
包裝與儲運： 水處理劑聚合氯化鋁固體產品用內襯聚乙烯袋的塑料編織袋包裝，每袋重25kg。水處理劑聚合氯化鋁產品應儲存在陰涼、通風、干燥的庫房中。儲運過程中應保持包裝完好無損，防止受熱受潮。不得與有毒物品共儲混運。
Packaging, storage and transportation: water treatment agent PAC solid polyethylene bags lined plastic woven bag, net weight 25kg. Water treatment agent PAC products should be stored in a cool, ventilated, dry dedicated warehouse. The packing should be kept in the storage and transportation process, avoid heat and moisture. Not with toxic substances being stored and transported.
