Product Features SH type static mixer is also called double spiral static mixer. There are two spiral pieces in each SH type unit. There are mixing chambers between the SH parts of the phase. The mixing effect of SH type is better than SK type, and SX. The type is similar. It can be used to disperse the droplets to 1-5um during the emulsification process. It is used in the general mixing process. The uniformity coefficient: aVX≤1-5% has a certain amplification effect. The pressure drop calculation of the product is expressed by the friction coefficient D of the mixer equivalent diameter and the inner diameter D. Table of relationship between SH type Reynolds number Re and friction coefficient f SH type product use It is suitable for mixing, emulsifying, color matching, injection molding, spinning, heat transfer and other processes in the departments of fine processing, expecting materials, synthetic fibers, and mining. It is especially suitable for cleaning media with small flow rate, high mixing requirement and viscosity ≤10 centipoise. Suitable for. SH type application example Application of SH type static mixer on acrylonitrile amide plant: In the production of deep acrylamide aqueous solution in propylene catalytic hydration, it is necessary to prepare 20% emulsion containing propylene explosion. If the two phases are not well mixed, it will lead to the reaction bed. The layer is partially overheated, affecting catalyst life and monomer quality. A petrochemical company used the SH type static mixer to use the monomer production part on the annual output of 200 tons of powdered acrylamide equipment, and achieved good results. The monomer quality meets the requirements. Application of SH type static mixer on residual oil-mixed fuel oil: a factory puts 20% water in the residue, and then adds 1% emulsifier to make fuel oil for nozzle combustion. SH type static is applied. The mixer, after emulsification of the fuel oil, is not easy to stratify and meets the process requirements. SH type product specification model table Description: 1. The nominal pressure is determined according to the user's process conditions. 2, material: stainless steel, carbon steel, titanium, fly PTFE, polypropylene, etc. 3, flange standard: match the user connection piece, can provide matching flange 4, the mixing unit can be designed to be drawable or fixed 5, hourly flow is based on water Note: The normal size of the two ends is enlarged by the nominal diameter of the product.