快速測定儀提供美國WILKS公司InfraCal CVH水中含油分析儀（紅外油脂分析儀/總石油烴分析儀），國WILKS公司InfraCal CVH水中含油分析儀國內一級代理銷售。
美國Wilks公司是世界*的紅外設備供應商，在紅外光譜領域有很強的技術積累。Wilks公司的InfraCal系列水中含油分析儀，包括HATR-T2，CVH和CH三個型號，都已經被認為是測量TOG/TPH，即總油脂含量、總石油烴含量的標準儀器，被國內外眾多石油化工行業的實驗室采用。
InfraCal CVH水中含油分析儀采用EPA方法413.2和418.1項或ASTM標準測試法D7066-04項，對應的提取溶劑分別為氟利昂，四氯乙烯，S-316，AK-225或其他紅外線透射溶劑進行萃取，這些提取溶劑的特點是都重于水，提取后溶劑沉于水底，再采用相關方法提取出來。由于在分析過程中沒有蒸發環節，因此CVH具有更高的測量精度。分析儀配備有一個內置的凹槽，整個分析需要不到10分鐘，儀器精度zui高可達到為2 ppm。
InfraCal CVH的特點
1、儀器操作簡單快捷，人性化設計，響應快速，性能穩定；
2、在操作時將裝有待測樣品的比色皿至于儀器中進行測量即可；
3、測量時間在10-15分鐘內，包括樣品前處理；
4、測量范圍大，可檢測2-4000ppm之間的濃度；
5、可檢測樣品中所有油類和芳香烴類物質的含量
6、可選用多種萃取溶劑，例如全氯乙烯,氟利昂-113, AK-225 orS-316等等
7、各種測試TOG/TPH的場合均可使用
InfraCal CVH水中含油分析儀的原理
Infracal型TOG/TPH紅外分析儀是基于快速測定水和土壤樣品中總油脂（TOG）和總石油烴（TPH）濃度的紅外光譜方法，其工作原理符合朗伯-比爾定律。即用一束強度為I0的特征紅外光照射樣品，由于油脂對特征紅外光產生吸收，透射光強度會減弱為I，樣品對特征紅外光的吸光度則為A=lg I0/I。根據光吸收的朗伯-比爾定律，吸光度與樣品中油脂濃度（C）的關系為A=abC，其中a為吸光系數，b為樣品池厚度，即樣品的吸光度與油脂濃度成正比。通常廠家出廠時已經用一組溶度已知的待測樣品建立了標定體系，用戶可以得知吸光度與油脂濃度的關系式，根據該關系式和被測樣品的吸光度，可以求出被測樣品中的油脂濃度。
InfraCal CVH技術參數
類型：固定濾光片紅外線濾光測試儀
規格：6.5×6.5×5英寸（165×165×225mm）
重量：4.5磅（2.0kg）
顯示：4位7段紅色LED屏，字符高度5/8英寸
電源要求：電壓12V直流，zui大+2%
功率：zui大7.5瓦，標準5瓦
輸入接口：switchcraft 760或類似插頭，為正極
建議電源：交流電源；交流/直流轉換器類型（標配）
12v自動電池連接器插頭（選配）
便捷式12v電池組（選配）
標準使用測量范圍：
水：2-1000ppm（用于10：1的萃取率）
土壤：3-5000ppm（用于1：2的萃取率）
可用萃取溶劑：氟利昂，全鹵代烴，S-316,AK-225
或其他可透過紅外線溶劑
分析時間：10-15分鐘，包含萃取過程
運行溫度范圍：40華氏度（4攝氏度）到110華氏度（45攝氏度）
用戶選擇性校準：0點平衡調節
zui多20點曲線擬合法校正
儀器可重復性+/-1ppm
CVH紅外分析儀測定TOG/TPH的使用場合
---在近海石油平臺上對生產用的樣品水進行分析
---監控煉油廠排放物、廢水處理或工業裝置
---測定油/水分離系統的效率
---地下儲存罐周圍的土壤環保指標研究
---測量預清洗金屬部件表面上的殘存油
---測定回收溶劑的純度水平
---其它對水或土壤進行現場測定的場合
InfraCal Model CVH詳細規格參數
Instrument Type | Fixed Filter Infrared Analyzer, Model CVH |
Analytical Wavelength/Wave Number | 3.4 µm, 2930 cm-1 |
Power Requirements | 12 Volts DC, 2.0 amps, 12 Volt battery pack or adapter available |
Power Supply | Universal AC/DC |
Weight | 4.4 lbs. (2.0 kgs) |
Dimensions | 6.5 x 6.5 x 5" (165 x 165 x 127 mm) |
Suggested Operating Range | 5°C- 40°C |
Typical Useful MeasurementRange: |
|
For Oil in Water | 2 - 1000 ppm |
For TPH in Soil | 200 - 5000 ppm |
Analysis Time | 10 - 15 minutes, including extraction process |
Instrument Repeatability | +/-1 ppm |
CommunicationPort | RS232 port, 9-pin D-Sub female, PC compatible |
Suggested Solvents | Perchloroethylene, S-316, AK-225 |
InfraCal Model CVH訂購配件信息可選配件說明
Part Number | Description |
405-0003/12 | InfraCal Cuvette Holder Analyzer, Model CVHfor oil in water or TPH in soil analysis Complete with CVH Sample Stage for use with 10mm Quartz Cuvette Cells, Power Supply and Instruction Manual. (Includes Set of 4 -- 10 mm Quartz Cuvette Cells). |
405-0003/12-40 | InfraCal Cuvette Holder Analyzer, Model CVH complete with Factory Calibrationusing S-316/TOG Calibration Standard SetP/N: 403-1040for water analysis.Recommendedfor customers measuring non-polar (petroleum) and polar (animal and vegetable fats) hydrocarbons for FOG or TOG measurementswith tetrachloroethylene or S-316 as the extracting solvent.Includes Set of 4 -- 10mm Quartz Cuvette Cells |
405-0003/12-41 | InfraCal Cuvette Holder Analyzer, Model CVH complete with Factory Calibrationusing S-316/TOG/TPH Calibration Standard SetP/N: 403-1041(Please specify if the calibration is for water or soil analysis)Recommended for customers in the petroleum industry that are just measuring petroleum hydrocarbons in water or soilａnd the now-banned Freon-113 is replaced with the S-316 solvent.Includes Set of 4 -- 10mm Quartz Cuvette Cells |
| InfraCal Cuvette Holder Analyzer, Model CVH complete with Factory CalibrationusingTetrachloroethylene (Perchloroethylene) TOG/TPH Six Point Calibration Standard SetP/N: 403-1064(Please specify if the calibration is for water or soil analysis)Recommended for customers in the petroleum industry that are just measuring petroleum hydrocarbons in water or soil. Includes Set of 4 -- 10mm Quartz Cuvette Cells |
Accessories | |
403-0012 | Set of 4 -- 10mm Quartz Cuvette Cells |
403-1067 | InfraLog Serial Printer, Model DT2205 Prints Calibration and measurement data, complete sequence number, date and time. Includes all required cables. |
403-0013 | Carrying Casewith pre-diced pluck foam. 18.5 x 14.6 x 8"; 10 lbs. |
403-0003 | External 12v Battery Pack with 120v/60 Hz charger (for use in North America). Includes carrying case with shoulder strap and cigarette lighter adapter cable for connection to the analyzer. Provides 16 hours of continuous operation. |
403-0002 | Cigarette Lighter Adapter Cable |
403-0005 | Dust Cover |
Field Sampling Kits | |
403-1010 | Field Sampling Kit for TPH in Soil |
403-1063 | Field Sampling Kit for Total Oil and Grease in Water |
Replacement Parts | |
403-0001 | Universal Switching Power Supply and Line Cordfor use with InfraCal Analyzers. 90 - 264 VAC, 50 - 60Hz input, regulated 12v/25 watt output. |
403-0014 | Replacement Source/Cable Assembly |
100-2002 | InfraCal TOG/TPH User's Manual - Model CVH Also availablefor downloadon our website at no charge. |
All InfraCal Analyzers come with a One Year Factory Warranty against defective parts and workmanship. Additional one and two year extended factory warranties are available. The extended warranty must be purchased at the time the analyzer is purchased. | |
EWOY | Extended Factory Warranty for an additional 12 month period(two year factory warranty from date of shipment) |
EWTY | Extended Factory Warranty for an additional 24 month period(three year factory warranty from date of shipment) |
