進口單級雙吸離心泵主要是用于抽送清水或物理化學性質類似于水的其它液體，輸送溫度不超過80度。改變?nèi)~輪、密封環和軸套的材料，可以輸送含有泥沙的渾水。泵的軸封一般采用軟填料，如有特殊定貨要求，也可裝機械密封。
產品特點
1、單級雙吸離心泵的吸入口和葉出均在水泵的軸心線下方，與軸線垂直成水平方向。泵殼中開，檢修時無需拆進出口、排出管及電動機。從傳動方向看去，水泵為順時針方向旋轉，也可以根據用戶需要改為逆時針方向旋轉。
2、主要零件有泵體、泵蓋、葉輪、軸、雙吸密封環、軸套等。除軸的制料為優質碳鋼外，其余主要零件為鑄鐵制成。
3、泵體與泵蓋構成葉輪的工作室。在進出水法蘭上，制有安裝真空表和壓力表的管螺孔。進出水法蘭的下部，制有放水的管螺孔。
4、經過靜平衡校驗的葉輪，用軸套和兩邊的軸螺母固定在軸上，其軸向位置可通過軸套螺母進行調整。葉輪的軸向力利用葉片驪布置、兩面進水達到平衡。
5、泵軸由兩個單列向必球軸承支承。軸承裝在軸承體內，安裝在泵體兩端，用黃油潤滑。
雙吸密封環用以減少水泵壓水室的水漏回吸水室。
6、通過彈性聯軸器由電動機直接傳動，必要時亦可用內燃機傳動。
7、軸封為軟填料密封。為了防止空氣進入泵內和冷卻潤滑密封腔，在填料之間裝有填料環，水泵工作時少量高壓水，通過泵蓋中開面上的梯形凹槽流入填料腔，起水封作用。
產品用途
主要適用于輸送各種潔凈水及輕腐蝕液體，可用于住宅供水及增壓工業鍋爐給水空調系統循環體會水水處理和反滲透系統 食品工業、醫藥工業用水。
工作條件
流量：0.8m3/h~120 m3/h。
揚程：5.6m~330m。
溫度：-20℃~120℃。
輸送液體種類：各種清潔水及輕腐蝕液體。
泵腔承壓：≤4.0MPa。
Single-stage dual-suction centrifugal pump is mainly used for pumping water or physical and chemical properties similar to other liquids of water, the delivery temperature does not exceed 80 degrees. Change the material of the impeller, the seal ring and the sleeve, and transport the muddy water containing the sediment. Pump shaft seal generally use soft packing, if the special order requirements, can also be installed mechanical seal.
Features
1, single-stage double-suction centrifugal pump suction and leaves are in the pump under the axis line, perpendicular to the axis into the horizontal direction. Pump shell open, maintenance without the need to open into the export, discharge pipe and motor. From the direction of the drive, the pump clockwise rotation, can also be changed according to user needs counterclockwise rotation.
2, the main parts of the pump, pump cover, impeller, shaft, double suction ring, sleeve and so on. In addition to the shaft of high-quality carbon steel materials, the rest of the main parts made of cast iron.
3, the pump body and pump cover constitute the impeller of the studio. In the inlet and outlet of the flange, the system has installed vacuum gauge and pressure gauge tube screw hole. Out of the lower part of the water flange, made of water pipe screw hole.
4, after static balance check the impeller, with a sleeve and both sides of the shaft nut fixed to the shaft, the axial position can be adjusted through the sleeve nut. Impeller of the axial force using the leaves of Li layout, both sides of the water to achieve balance.
5, the pump shaft by two single row to the ball bearing support. Bearings installed in the bearing body, installed at both ends of the pump, with butter lubrication.
Double suction seal ring to reduce the pump water chamber water leakage back to the suction chamber.
6, through the flexible coupling by the motor direct drive, if necessary, can also use internal combustion engine drive.
7, the shaft seal for the soft packing seal. In order to prevent air from entering the pump and cooling the lubrication chamber, a packing ring is provided between the packing, and the pump is operated with a small amount of high pressure water and flows into the packing chamber through the trapezoidal groove on the opening of the pump cover.
Product Usage
Mainly used for conveying all kinds of clean water and light corrosion liquid can be used for residential water supply and pressurized industrial boiler water supply air conditioning system cycle experience water treatment and reverse osmosis system food industry, pharmaceutical industry water.
Working conditions
Flow: 0.8m3 / h ~ 120 m3 / h.
Head: 5.6m ~ 330m.
Temperature: -20 ℃ ~ 120 ℃.
Liquid type: all kinds of clean water and light corrosion liquid.
Pump chamber pressure: ≤4.0MPa.
德國漢克（HANK）成立于1852年創建于門興格拉德巴赫（Monchengladbach）是位于德國北萊茵-威斯特州杜塞爾多夫市以西的一座城市。于19世紀50年代初德國經濟快速發展，由于德國能源短缺，政府在節能方面加大力度，因此HANK(Trouble Less pump*的水泵)公司成立。漢克水泵是以生產高品質、*的水泵、測量及控制系統而的跨國性生產企業，在幾十個國家擁有子公司及分支機構，公司產品涉及用途：石油、化工、電力、冶金、制藥、食品、水處理、市政給排水、天然氣、造紙、電子工業、樓宇、機械設備配套等領域。
GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..
德國漢克（HANK）水泵的價值理念概括為：責任－遠見－創新。我們因自身的責任感、遠見及專注于創造的解決方案和理念，而成為的水泵制造商。
The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.
