BS7069標準炊具測試機/NF D21-511相關標準設計炊具測試儀/炊具測試機
BLD-JRNM25往復式涂層耐磨測試機
1.依據BS7069 及NF D21-511相關標準設計,主要應用于認證機構,炊具公司實驗室試驗產品使用。
2.使用220V電壓,50HZ,使用調速電動馬達
3.用于不沾鍋涂層耐磨損試驗
4.使用方法交用夾具鎖緊,鍋的底面應與電爐表面*接觸,裝上百潔布的工作組件與不沾鍋內涂層表面平行,并以自身重力下壓使其*接觸,并在鍋內放一定量的測試液(根據各標準而定)
5.工作臺以一定的距離來回帶動鍋與百潔布摩擦(根據各標準而定),以達到試驗不沾鍋涂層耐磨程度目的。
6.測試周期0-9999次,預設測試周期到后機器自動停止并報警。
7.以上試驗方法以客戶使用標準而自定或由我司提供試驗方法。
8.電壓:220V
BS7069標準炊具測試機/NF D21-511相關標準設計炊具測試儀/炊具測試機
BLD-JRNM25往復式涂層耐磨測試機
1.依據BS7069 及NF D21-511相關標準設計,主要應用于認證機構,炊具公司實驗室試驗產品使用。
2.使用220V電壓,50HZ,使用調速電動馬達
3.用于不沾鍋涂層耐磨損試驗
4.使用方法交用夾具鎖緊,鍋的底面應與電爐表面*接觸,裝上百潔布的工作組件與不沾鍋內涂層表面平行,并以自身重力下壓使其*接觸,并在鍋內放一定量的測試液(根據各標準而定)
5.工作臺以一定的距離來回帶動鍋與百潔布摩擦(根據各標準而定),以達到試驗不沾鍋涂層耐磨程度目的。
6.測試周期0-9999次,預設測試周期到后機器自動停止并報警。
7.以上試驗方法以客戶使用標準而自定或由我司提供試驗方法。
8.電壓:220V
D21-511相關標準設計炊具測試儀/炊具測試機
BS7069 standard cooker test machine/NF D21-511 standards design cooker BLD - JRNM25 reciprocating coating wear test machine
BLD - JRNM25 reciprocating coating wear testing machine
1. According to the standard design BS7069 and NF D21-511 related, mainly used in the certification body, cookers use laboratory test products of the company.
2. The use of voltage 220 v, 50 hz, use speed electric motor
3. Used for non-stick pan coating resistant to abrasion test
4. Usage/fixture for locking, pot bottom should certainly contact surface of the furnace, and work with hundreds of microfiber cloth components with non-stick pan coating surface parallel to and by its own gravity press to make it fully contact, and in the pot to put a certain amount of test solution (according to the standard)
5. Table at a certain distance to drive back and forth pot with microfiber cloth friction (according to the standard), in order to achieve test non-stick pan coating wear-resisting degree.
6. 0-9999 test cycle time, the preset test cycle after the machine stop and alarm automatically.
7. The above test method with customers to use standard and customised or provided by our test method.
8. Voltage: 220 v